PDA

View Full Version : kawasaki Tecate



azzkikker
04-24-2008, 02:31 PM
Can anyone tell me what kind ocarb is on an 84 Kawasaki Tecate250cc? Friends bike it running rough and eating plugs. I was going to clean the carb and set the pilot. where are you setting the pilot at?
Thanks.

azzkikker
04-24-2008, 03:32 PM
Spec page says its a Keihin VM32SS carb. Well, which is it? the VM32SS is made by Mikuni?.?... Can anyone shed light on that?
Thanks

Tecate250
04-24-2008, 04:21 PM
I do believe it should be a mukuni round slide

3Razors
04-24-2008, 04:31 PM
I have extra time on my hands so I thought I would look it up for ya:)

32mm Roundbore mikuni
230 main
45 pilot
Needle 6fj50-4 with clip on 4th groove from the top
Float height 23.8 +/- 1mm
Air Screw not listed but a good rule of thumb is 1.5 turns out from lightly seated.

This info is straight from the oem Kawasaki workshop manual.

The Goat
04-24-2008, 07:15 PM
good god, they're running a 230 main straight stock?

SWIGIN
04-24-2008, 07:45 PM
good god, they're running a 230 main straight stock?


mikuni uses a different numbering system

scooterroo
04-25-2008, 09:15 AM
tell your friend to junk the stocker and throw an 38mm airstyrker on that bad boy!!! cheapon ebay, new for like 185-225 bucks.

azzkikker
04-28-2008, 11:41 AM
Thanks for the info guys!!!