Cr 500 Pipe!

[Paul C.]

Hi fellow Trikers,
I'm sure this question has been talked about before, but I did do a search and couldn't find anything on it.
Can a CR500 Pipe bolt straight onto an 86R, or do you need to modify it?

Thanks.

Paul.

[Bryan Raffa]

everyone I have seen had to be modified

[200x Basket]

i had to modify mine.

http://i34.photobucket.com/albums/d124/LuvNStarGazn/3wheeler/500rhill.jpg

[Paul C.]

i had to modify mine.

http://i34.photobucket.com/albums/d124/LuvNStarGazn/3wheeler/500rhill.jpg

What mods did you do?
Is the flange the same size on the 250 pipe?

[Billy Golightly]

http://www.3wheelerworldforums.com/showpost.php?p=602952&postcount=91

Theres mine I made from an 85-87 DG CR500 pipe. It wasn't real hard, just time consuming.

[NOS_350X]

Guys i think he wants to bolt on a cr500 pipe to a atc250r.
In that case it wont just bolt on. The flange and stinger are both larger on the 500.

[Paul C.]

Yes that's right, I am putting a 310 kit on my 86r and I am looking at pipe options.
I got a new DG pipe but then I was told that it would be too restrictive with my new set-up.
Is this true?
If so, what pipe should I run?

Thanks

Paul.

[Billy Golightly]

Your just running a 310 kit? You dont need a CR500 pipe...just get a good 250R pipe like an Paul Turner High rev, ESR, or an old FMF.

[Paul C.]

Thanks Billy,
What about the DG? will that do the job?

[Black86tri-z]

Thanks Billy,
What about the DG? will that do the job?

nope not evan close

[Billy Golightly]

It should physically work because the exhaust port on the 310cylinders isn't any larger, but you wont get the performance gain you should.

[200x Basket]

go with the ESR or contact CT racing for a pipe.