Yamaha blaster

[Big red 200es]

Can anyone tell me were is the idle screw on a 1998 yamaha blaster?
I want to be sure to not nist adjust my carb setting.

Thanks Nick

[super90]

Pretty sure its on the right side right behind the kicker if i remember right

[SYKO]

I think your right, cant remember though, hey big red as soon as you can ditch that whole crappy carb on that blaster and pick up a carb off a honda 250R (along with cable and thumber, put some good reeds in and that blaster will shine! those stock carbs are terrible performing carbs, also premix the fuel instead of the auto injection, not becouse it will fail, just becouse youcan better tune your motor with premix.

[Big red 200es]

ok thanks now I premix my gas.
Yes I want to put v-force or boyseen reedvalve and some porting and polishing.
Now I have an FmF fatty+FmF powercore2 and now I dont have the money to invest in my blaster.

Thanks Nick

[SYKO]

make sure you invest in some jets! skipp lunch for a few days! you need to tune that motor for the pipe for sure, also make sure if you dont have the line for the oil injection hooked to the carb anymore you got that inlet covered, you can lean out your motor otherwise!

[Big red 200es]

All is jetted and ok.
My spark plug is brown.

[SYKO]

good deal!
rip it up homie!

[scooterroo]

now jump that carb up, go with a 250r carb, or go with anything thats bigger then the crappy 26mm on there. i had a 30mm on mine and you definately noticed the boost in performance, but now i am going with a 34mm just cuz i can, lol. can't wait to see what it does. the v-force system is a good upgrade, never used the boysen reeds so can;t tell yah anyhting about them.

[chavo80]

yeah, blaster good choice...2 stroke power!!!!!