I need exhaust help !!

[Big red 200es]

On my blaster I have and FMF fatty and a powercore2. Is like if the muffleur is to short to do a good joint with the pipe.So I want to put something on the joint but what?

I think is normal I see some blaster on pics that have something to joint their pipe.

Thanks Nick

[scooterroo]

they should slide together and then have a rubber grommet with two clamps on each end. after slipping the silencer into the end of the pipe, then slide the rubber grommet over the connection and tighten each end up to make a good seal.

[Big red 200es]

But where you take this rubber grommet ?
And the rubber doesn't melt ?

Thanks
Nick

[lndy650]

you could order one from toomey http://www.toomey.com/html/pipe_parts1.htm
should be the same size and use high temp silicone when you put one on. or try just silicone smear both sides then slide them together

[Big red 200es]

Thanks for the idea guys.
I put a radiator tube I will see if its good.

[MTS]

Thanks for the idea guys.
I put a radiator tube I will see if its good.

Small rad hose will work just fine with some high temperature RTV or silicone sealant, and 2 hose clamps, :beer , Orivate message me if you have any problems, :)