350x Rear Axle Removal Questions

[RUTHLESS]

Help, I Am Taking My Rear 86 350x Axle Apart For The First Time
I Do Not Have The Tool For The Carrier
Can I Use Something Else
After That Is There Circlips Inside?
The Axle Comes Out From The Carrier From Left To Right
If You Are Looking At The Back Correct???
Is The Sprocket Hub Just Pressed On
Can I Bang It Off With A Soft Blow Hammer
Help!!!!!!!!

[tanks350x]

here is a pic that should help you out some
http://i287.photobucket.com/albums/ll124/tankispmaximus/cef4aaf6.jpg
Heres the thing, loosen up the skinny nut first, then the big one,, oh yea they are threaded backwards. I understand that what you are looking at is wrong but when you take it apart remember how to put it back together.. when you get the c-clip off everything slides off even the disk hub. All you need is a good pair of c-clip pliers to get the caliper mount off.. When you pit it together again, make sure you have the c-clip collar slide over the c-clip,,, last

[RUTHLESS]

thanks-tanks350x

you are a life saver, now i know
came apart like butter