1985 Honda Atc200s Questions!!!

[chs10balla]

its a 1985 honda atc200s i just picked it up for 125.00 but the problem is the rear axle bearings are totally shot.. like i can rock the trike and the axle dont rock with it.. what do i have to to do fix that.. i can roll it a short distance then it locks up..can you replace rear bearings or do u have to buy the whole axle..is it a pain to do? and i took the carb off and it is varnished green inside.. how can u get that guk out? my email is hostetler_truck@windstream.net thanks

[Frankencelery]

You definitely need wheel bearings. Yes, you can replace the rear wheel bearings. Be prepared for a job! It's hard work, but not hard, if that makes sense. I buy most of my parts from dratv.com so check them out. Otherwise, I've often gotten bearing kits from mfgsupply.com. Either way, you'll need two bearings and two seals.

The carb can be cleaned out with regular carb cleaner or a carburetor dip. Check your local auto parts store. You'll likely need a carb kit as well, which you can also get from dratv.com. If you have other questions, just ask. People on here are always willing to help!

[Taiser]

If it's rocking that bad they should not be that hard to get out (bearings) as they probably disintegrated. Worst thing is taking everything apart in the back to get them out. Not really a hard job just time consuming. For 125$ it's hard to go wrong. If it's running for that price you got a steal...at least here it would be!

[chs10balla]

wat all do i need to replace them? and what all do i take off? does anyone have a scanned blowup of the service manual for replacing bearings? thanks