PDA

View Full Version : 84 200 Big Red no spark now has spark but



y2kane
08-02-2008, 09:17 PM
Ok I found a loose wire and now have strong spark!!!:D :D

I sprayed starting fluid in to the spark plug hole and replaced the plug. It still would not start. did this 3 or four times with nothing. What could be causing this not to start. It has good compression. I am getting very frustrated with this trike. :mad:
any suggestions would be greatly appreciated.

Thanks

WaimakRydah
08-02-2008, 10:44 PM
possibly something to do with the carb? just my $0.2 your fuel switch could be clogged.

y2kane
08-03-2008, 01:25 AM
might be but it should still fire with starting fluid in the spark plug hole right?

fabiodriven
08-03-2008, 01:30 AM
Timing could be off?

y2kane
08-03-2008, 01:41 AM
ok might be can that be changed via the stator or is the only way to change it through the timing chain? sorry newbie in that area...lol

fabiodriven
08-03-2008, 01:51 AM
Valve timing and ignition timing are two different things. It's unlikely that your valve timing is off unless you've been skrewing around with your valve gear. Or, the stator could be off.

y2kane
08-03-2008, 11:24 AM
Ok thanks will mess with stator later this afternoon and see if I can get it working...

WIGGLES
08-03-2008, 11:53 AM
you got some water in the gas. drain a bit out of the carb.