'06 Suzuki Ozark valve adjustment questions

[ccdhowell]

I have an '06 Suzuki Ozark 250cc 4stroke. Never adjusted the valves and figure it's about time. Trouble is I can't find a manual to buy, steal, copy or otherwise take a look at to tell me what to line-up and what the lash specs are.

Anybody done one of these and can help?

Thanks,
Chris

[SWIGIN]

call the dealer, they have to know

[SWIGIN]

call the dealer, they have to know

[ccdhowell]

call the dealer, they have to know

Yeah, hate the stinkin' dealer. Promised myself I'd never set foot in there again. Don't want to go askin for info from that bunch. I'd rather blow it up than...you get the idea.

[SWIGIN]

in that case just make sure your on the compression stroke and both rockers are on the lowest part of the cam (not on the lobe ) and set to.....lets see........ .005.

if that's to much they will tap ....then try .004

[ccdhowell]

Yeah, that's probably what I'm gonna do...wing-it. I'm thinking surely I can tell when I'm at TDC on the compression stroke and then .004 or .005 is typical for lash. Then again I'll bet if I pull of the cam gear cover and the crank access hole that some kind of marks will line up and then i'd be at TDC. I just need to try it and see what happens.

Chris