new front rim for 110

[kilabeez0]

what is the offset i need? dennis kirk had some 3.5 x 5 offset, but i'm not sure if that was only for the back. i know the fronts are a weird size. and i've also heard that an older suzuki front rim fits as well so i can broaden the search. thanks.

[SWIGIN]

basically any netral offset wheel will work

this is why i used a suzuki q sport rear wheel ....its aluminium and netral offset (both sides measure the same...or close) and i liked the idea of a facory gold front wheel on my 110

[kilabeez0]

what does that mean? what is a neutral offset? i saw some 2 x 3 offset when i typed in suzuki quadsport.

[SWIGIN]

read post 2 again

i said it means both sides have the same offset.....2x3 would be a 5'' wheel and thats a front quad wheel, not a rear like i used

i never cared to check the spacing since its netral but its a 8'' wide wheel so it would have to be a 4x4

[SWIGIN]

one more thing

the suzuki wheels are 4 on 130 witch matched my 85 110 front hub but you do need to machine out the center hole so the hub fits right....they do not go right on

[kilabeez0]

ok with using an 86 suzuki LT230S quadsport search, i got these as options
http://www.rockymountainatv.com/typeDetail.do?navType=type&navTitle=Tires+and+Wheels&webTypeId=237&webCatId=8#vehicleSelect

they dont list the offset which kind of stinks, but i just want to make sure this is what i should be using for a search. they sell a 10 x 8 in addition to the 8 x 8. maybe i could go with a larger front rim and give it that sportier look. :naughty:

what do you think? am i going in the right direction?

[kilabeez0]

oh wait it does say the offset once you select all the options on sizes. the ITP steelie is 3.5 x 5 which is pretty close and a 8 x 8.5 wheel

the douglas aluminums are 3 x 5 which is pretty close as well, with either an 8 x 8 or 10 x 8 wheel.

has no one else ever bought a new front rim the their old 110???

[Vealmonkey]

If your needing a 4 bolt front rim, a front rim off and atc 185/185s/200m/200s will work since they are the same rim. If you have the older 3 bolt pattern hub, then a front rim off an yt125/175 yamaha will work. You might have to look at a wheel manufactures website to special order the front wheel you need.

[SWIGIN]

oh wait it does say the offset once you select all the options on sizes. the ITP steelie is 3.5 x 5 which is pretty close and a 8 x 8.5 wheel

the douglas aluminums are 3 x 5 which is pretty close as well, with either an 8 x 8 or 10 x 8 wheel.

has no one else ever bought a new front rim the their old 110???

they might not list a 4x4 offset but they make them.

i used a factory 9x8 q sport rear wheel

[kilabeez0]

i emailed dennis kirk and rocky mountain, i'm still waiting for their response.

[rdlsz24]

If your needing a 4 bolt front rim, a front rim off and atc 185/185s/200m/200s will work since they are the same rim

If that's the case, I have an '81 ATC 200 rim with a tire still on it I can sell you. It's just sitting in my garage attic. If you're interested I can take pics and measurements since I will be messing around in the garage tomorrow.

Rob

[kilabeez0]

hello, thanks for contacting us here at dennis kirk.
unfortunately we don't sell a rim that matches your specs.
try http://dratv.com or www.3wheelerworld.com.
have a good day,
rick

dennis kirk, inc.

www.denniskirk.com
sales: 800-328-9280
tech: 320-358-4793


Dear Peter,

Thank you for your email. I have looked into this for you and
we do have an 8x8 wheel in a 4/130 bolt pattern. However, we do not
have any in the offset you requested. The only offset we have available
in this size is 3.0 + 5.0. We do not have any wheels in a 9x8 with the
4/130 bolt pattern. Please let us know if you have any other questions.
Have a great day!

Thank you,

Lori
Rocky Mountain ATV/MC
800-336-5437 ext 314


no luck

[250rAL]

Why not contact Douglas Wheel directly. I know they used to have one because I bought one back in the 80's. They just might be able to make one for you.

[rdlsz24]

Here's the one I have. The tire size is 22x11x8 so I know it's an 8" rim, and it looks like it's 8" wide with neutral offset. It had those ring on each side too.

http://img.photobucket.com/albums/v603/rdlsz24/Selling/rim1.jpg

http://img.photobucket.com/albums/v603/rdlsz24/Selling/rim2.jpg

http://img.photobucket.com/albums/v603/rdlsz24/Selling/rim3.jpg

Rob

[SWIGIN]

yeah thats a stock split wheel and your right....its a 8x8 wheel with a 4x4 offset

just because those shops dont sell that wheel (witch cant sell very good) dont mean its not made.

like was said before go direct or have a dealer order you one in. it would be nice to pick one up anywhere but after 20 years those neutral offset wheels are rare nowadays and unwanted.

[kilabeez0]

i'm going to email douglas directly. i will post back the results. are dealer rims still available for these?

[SWIGIN]

i'm going to email douglas directly. i will post back the results. are dealer rims still available for these?



i ment a dealer can order aftermarket stuff as well as factory stuff

[kilabeez0]

wow they have it!

Yes!

Part No.: 010-01
Description: 8X8 4B+4N 4/130.125 8MM
Retail: $55.50ea


Jaime M. Luke
Customer Service Representative

DWT Racing
1340 N. Melrose Drive
Vista, CA 92083

Tel: (760) 758-5560 Ext. 3023
Fax: (760) 758-5991

jaimep@dwtracing.com