Good Gaskets?

[Atc GuY]

I'm replacing all the gaskets in my 200x (head gasket particularly) and was wondering what brands were any good? Any ideas?:crazy:

[Dirtcrasher]

I'm partial to OEM. If I can't get them I try to use VESRAH which in a few dozen motors, I've had very good luck with them.......

[Atc GuY]

What about these?
http://cgi.ebay.com/ebaymotors/COMPLETE-GASKET-SET-HONDA-ATC200S-ATC200X-ATC-200S-200X_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1163Q7c39Q3a 1Q7c66Q3a2Q7c65Q3a12Q7c240Q3a1318QQ_trksidZp3286Q2 ec0Q2em14QQhashZitem280265118631QQitemZ28026511863 1

[Atc GuY]

Bought them

[Daddio]

How do they fit?
Oem is always the best choice in my opinion.

[3Razors]

I'm partial to OEM. If I can't get them I try to use VESRAH which in a few dozen motors, I've had very good luck with them.......

Same here..OEM is best but Vesrah comes in a close 2nd.

[Jonpin]

I got the same kit for my 350x "well the same brand" let us know how they work for you ,i would be glad to hear they work well i need to get some bearings to id any one knows of some good ones to get that dont cost an arm and a leg i was going to get some off ebay .

[Atc GuY]

How do they fit?
Oem is always the best choice in my opinion.
I'll let you know how they fit, hopefully they will be here by the end of this week, but with fleebay you never know. Looking at new valve seals and cam-chain, need some imput on where to get these.
:TrikesOwn

[Billy Golightly]

OEM or Cometic. They make very high quality gaskets as well.

[thefox]

Same here..OEM is best but Vesrah comes in a close 2nd.

Really? I think Versa is ok but not that good. Mainly their head gaskets are what I don't like. The Versa kits I have bought (and it looks like that ebay kit) come with the one piece composite type head gasket wich I don't like as much as the OEM style metal gasket. The Athena kits from Bikebandit are nice, they fit as well or better then the versa kits and come with the OEM style head gasket.


This is just my personal thoughts of course, I'm no pro.

[Atc GuY]

I contacted the owner before the previous owner and he said that he put vesrah gasket on it.

[3Razors]

TheFox, I like Vesrah because they are made in Japan with very tight quality control/tolerances and are the OEM gasket supplier for many manufacturers. Which model are you talking about for the metal head gasket? All the gaskets kits I've seen come from Vesrah are identical to OEM.

[300rman]

To me, a gasket is good if it fits and doesnt leak.

and all the vesrah head gaskets i have seen are copper, at least for my R. and i have bought 3 gasket kits for it.......