Need help flywheel removal!

[Atc GuY]

Hey, I'm tearing my 200x down and need to know which way the flywheel nut comes off R-hand thred or L-hand? Also how to you hold the flywheel? I put it in gear and the sprocket just spins. Any ideas? :wondering

[ATC-Eric]

You could put it in gear, then have someone stand on the rear brake.

Dont know which way the nut goes on a 200x, should just be Righty-tighty.

[Atc GuY]

Ok got the nut off, but not the flywheel. Looks as though I'll need to get the puller. Or I can pick a bolt up at the hardware and turn it with the lathe... Any ideas?

[fabiodriven]

I dunno about your situation, but I used to use a regular three way puller, similar to a steering wheel puller.

[Yamatrike400]

Yes ive also used that^^ If theres just 2 holes in the flywheel i just stick in 2 arms and it works good.

[Atc GuY]

Ok I'll try that. I didn't know if the holes would stand the pulling stress. I really didn't want to go buy a flywheel.

[SWIGIN]

just use your front axle

[rugabugadouglas]

a chevy truck stud works just get the thread and pitch and go to the parts store thats what i did

[Atc GuY]

Got my gaskets!, here's the pic:
http://i251.photobucket.com/albums/gg318/charlevoixboy/100_1787.jpg
Looks like the seller had bought them before and trimmed the lables offand put his on. Who cares though they look good.