Post pics of your rarest trikes and parts pics!

[edog]

Well lets see them?!?!?!?!?!

[250rfan]

Well lets see them?!?!?!?!?!


Looking for information or a rare part ehhhh,,,,edog?:wondering

Why dont you bring something to the table,,:welcome:

[edog]

Looking for information or a rare part ehhhh,,,,edog?:wondering

Why dont you bring something to the table,,:welcome:

I know you have nothing to bring to the table!!!!lol

[1upfront]

Heres my RARE 82mm mystery bigbore kit its the bare one on the left next to a 300r kit. It reqiires boring the cases, stroking the crank and running an odyssey 350 piston to run this bad mofo!
http://i39.photobucket.com/albums/e183/lrdunlap/100_0230.jpg

[Vealmonkey]

Edog, what is rare nowadays? Give me some idea. How about a center mounted shock Tiger frame, just like Doctor Deaths'?

[edog]

Edog, what is rare nowadays? Give me some idea. How about a center mounted shock Tiger frame, just like Doctor Deaths'?

Ding ding ding...We have a winner.

[Vealmonkey]

I'll try and get pics and post tomorrow. I'm not feeling very good, think I'm catching a cold and I have to go to work at 10pm tonight to begin my week of midnight shifts. But I really have to say. Pretty much anyone with a trike or a nos or new aftermarket part has something rare. There are fewer of these trikes everyday. Even though money has done alot to bring out some of the really crazy stuff, every trike owner has their own rare trike.

[edog]

I'll try and get pics and post tomorrow. I'm not feeling very good, think I'm catching a cold and I have to go to work at 10pm tonight to begin my week of midnight shifts. But I really have to say. Pretty much anyone with a trike or a nos or new aftermarket part has something rare. There are fewer of these trikes everyday. Even though money has done alot to bring out some of the really crazy stuff, every trike owner has their own rare trike.

I had the flu last week.

Cool can't wait!!!

[carscomefirst]

Dont know how rare it is, but it is the only 87 125m I've ever seen.

[edog]

Those are pretty rare.There are not alot of them around.

Trailpro's ...the tire that will outlast the cockroach.

[edog]

Here is my hondaline honda,the parts have been recently taken off stored.
http://i64.photobucket.com/albums/h196/edog_02/100_4128.jpg



here are some old Durablue wheel spacers
http://i64.photobucket.com/albums/h196/edog_02/100_5679.jpg

[Daddio]

Heres my RARE 82mm mystery bigbore kit its the bare one on the left next to a 300r kit. It reqiires boring the cases, stroking the crank and running an odyssey 350 piston to run this bad mofo!
http://i39.photobucket.com/albums/e183/lrdunlap/100_0230.jpg

Actually this is what Mike Coe had to say about that cylinder.

CoeShow CoeShow is offline
Registered User
Arm chair racer

Join Date: Sep 2005
Location: San Diego
Posts: 126
Re: 250r question
Daddio,

You may have stumbled across a very rare top end that was only available to Team Honda directly from Japan. We were sent Team specific 350cc engine package from Japan. If the cylinder you have is in fact one of those, you have scored!

You should measure the height of the cylinder. You may find that it is a bit longer than the 300 cylinder. This is because part of the 350 kit was also a crankshaft with a little longer stroke to complete the 350cc package.

We race tested a number of of the 350cc "kits" in open class competition with excellent results! Ultimately Honda decided that a "bolt-on" kit would be a better seller due to ease of installation, hence the well known 300cc kits.

Did the head also come with the cylinder? Since it appears you have a number of similar parts such as the 300 cylinder and the idiossy cylinder, you could use one of those haeds and modify it to work as I believe they all shared the same bolt pattern and spacing.

You would then need to see if you can score the proper crankshaft or at minimum have a stock 250 crank stroked to 69 or 70 mm to complete your
350cc kit. Once again, nice find! Keep digging, you may be able to uncover the rest of the parts!

I think the counter balancer was also a bit different as well and also came from Japan with the rest of the 350cc parts. If you can't find those parts I feel you will still find the 350 kit worthwhile to have 250 parts modified to complete the conversion.

Honda Japan also sent water cooled top-end parts for our 84 model trikes! The parts were also "bolt-on" deals. I personally had all of the brackets and radiators custom made for all of our conversions!

I still have a few of these "kits" myself and currently have one installed on my original 1981 model
ATC250R racer.

Good luck and ride safely.

Quote:
Originally Posted by Daddio
I have a question for you. My son "1upfront"drag races air cooled 250Rs so he is always looking for performance parts on e-bay. He recently bought a cylinder that was advertised as a hondaline 300r cylinder. When we looked at it on ebay it looked different than his other 300r cylinders. When it showed up here we measured the bore. It measured 80mm. It used to be red and has never been used. It isn't a mugen 360 and the 300s have a 76mm bore. There are no manufacturers marks on it. It also isn't an odyssey cylinder. We were wondering if you had ever heard of any other companies that made big bore cylinders for the old Rs back in the 80s?. Here are a few pics.

The black one is a 300. The next one is with a 350 odyssey cylinder. The last one is his baby.


Thanks for your time, Ron Dunlap "Daddio"
Forward Message

[edog]

Actually this is what Mike Coe had to say about that cylinder.

CoeShow CoeShow is offline
Registered User
Arm chair racer

Join Date: Sep 2005
Location: San Diego
Posts: 126
Re: 250r question
Daddio,

You may have stumbled across a very rare top end that was only available to Team Honda directly from Japan. We were sent Team specific 350cc engine package from Japan. If the cylinder you have is in fact one of those, you have scored!

You should measure the height of the cylinder. You may find that it is a bit longer than the 300 cylinder. This is because part of the 350 kit was also a crankshaft with a little longer stroke to complete the 350cc package.

We race tested a number of of the 350cc "kits" in open class competition with excellent results! Ultimately Honda decided that a "bolt-on" kit would be a better seller due to ease of installation, hence the well known 300cc kits.

Did the head also come with the cylinder? Since it appears you have a number of similar parts such as the 300 cylinder and the idiossy cylinder, you could use one of those haeds and modify it to work as I believe they all shared the same bolt pattern and spacing.

You would then need to see if you can score the proper crankshaft or at minimum have a stock 250 crank stroked to 69 or 70 mm to complete your
350cc kit. Once again, nice find! Keep digging, you may be able to uncover the rest of the parts!

I think the counter balancer was also a bit different as well and also came from Japan with the rest of the 350cc parts. If you can't find those parts I feel you will still find the 350 kit worthwhile to have 250 parts modified to complete the conversion.

Honda Japan also sent water cooled top-end parts for our 84 model trikes! The parts were also "bolt-on" deals. I personally had all of the brackets and radiators custom made for all of our conversions!

I still have a few of these "kits" myself and currently have one installed on my original 1981 model
ATC250R racer.

Good luck and ride safely.

Quote:
Originally Posted by Daddio
I have a question for you. My son "1upfront"drag races air cooled 250Rs so he is always looking for performance parts on e-bay. He recently bought a cylinder that was advertised as a hondaline 300r cylinder. When we looked at it on ebay it looked different than his other 300r cylinders. When it showed up here we measured the bore. It measured 80mm. It used to be red and has never been used. It isn't a mugen 360 and the 300s have a 76mm bore. There are no manufacturers marks on it. It also isn't an odyssey cylinder. We were wondering if you had ever heard of any other companies that made big bore cylinders for the old Rs back in the 80s?. Here are a few pics.

The black one is a 300. The next one is with a 350 odyssey cylinder. The last one is his baby.


Thanks for your time, Ron Dunlap "Daddio"
Forward Message

Cool info!!!!!

[Daddio]

How about a Durablue +2 swinger for an 83-84 250r. Another of 1upfronts finds.
http://i39.photobucket.com/albums/e183/lrdunlap/100_0081.jpg

[toocheaptosmoke]

How about a Durablue +2 swinger for an 83-84 250r. Another of 1upfronts finds.
http://i39.photobucket.com/albums/e183/lrdunlap/100_0081.jpg

Nice! You guys have some sweet air fooler stuff. :beer

[300rman]

Balanced air fooler crank. runnin no Counter balancer with it, and i notice no difference in vibes. but MAN is this thing a low-end power BEAST.

http://i115.photobucket.com/albums/n313/NightBiker07/100_0222.jpg
http://i115.photobucket.com/albums/n313/NightBiker07/100_0224.jpg

and the EMLER head, only know of one other, i believe Mike from long island has it.
http://i115.photobucket.com/albums/n313/NightBiker07/DSCI0025.jpg
http://i115.photobucket.com/albums/n313/NightBiker07/DSCI0024.jpg

[mike from long island]

300rman is correct.I have a brand new Emler head.I just sold it though.I do have a +2 Westcoast for my 1985 Tri-Z.I will have to dig around and see what else I have.

[SYKO]

I had a aftermarket swinger for the 82 250R it was a PK and mike knows about it, it also had a rare extended axle for the 82 250R as well still in it... sold it to another member on the boards, other then that I got nothin.

[HondaHarry]

RAM Stabilizer for 85/86R only seen one other. HH

[dcreel]

I've got a Ram stabilizer for the 84-85 Tecate
+2 Westcoast swingarm for the 84-85 Tecate
UFO airbox for the 84-85 Tecate

and another +2 swingarm of unknown origin for the 84-85 tecate

Goki electric start on my 200X

:w00t:

[edog]

RAM Stabilizer for 85/86R only seen one other. HH

I seen one on ebay awhile ago.Missed it by a couple dollars.:mad:

[tri-Z ripper]

where the heck did you score the goki electric start for a 200X now that is a rare one!

[Nick_R_23]

I have a stabilizer on my 250r also but I have no idea who made it. Thats about the extent of my rare parts. But I do have a friend that has a +5 axle on his 200x. The only other one we've seen that was similar was the axle on the 200x on Powrolls website.

-Nick :TrikesOwn

[iowarotax]

Heres a few rare NOS parts for the Tigers. One wide front fender and four narrow fronts, never mounted. Also a Tiger tank and 500 frame never used. I dont think too many of these will show up again!

[brapp]

i think the rarest trike her eis howdies lil brlue 90 that was done uo by i belive 3wheelign magazine howdy can u chime in?

[Vealmonkey]

You just may be right about howdys' trike. I haven't seen anything about it since it went to trikefest that one year. I remember following the thread of how he got the boxes 1 by 1 and that he said his mailman or ups guy was hating him, but how he thought the trike was cool. I still like to think that everyone with a trike has their own rare machine though.

[edog]

Okay here is my rare trike the one and only GPX 177.
http://i64.photobucket.com/albums/h196/edog_02/100_5429-1.jpg

[greenhuman]

I have a NOS accessory tail light kit for the early ATC 70, NOS on/off throttle tops for the US90's, an ATC 70 with the build date of 11/86 on the Vin plate and one only Cowsay.

[Nick_R_23]

Got enough Armor All on the shelf there, Edoggy?? :lol: :lol:

-Nick :TrikeOwn

[Dammit!]

Original grab bars for a 350x and a water cooled 250R in awesome condition.

Restored 1986 250R +2 Westcoast swinger.

Got two sets of those NASA adjustable fork caps also. Probably other items that I'm just not thinking about right now.

I'd let the grab bars go for the rightprice. The NASA caps and the Westcoast are going on my R though. I just need to buy a longer chain first.

[oscarmayer]

very nice trike Edog! SWEETNESS!!!!!!
:drool:

[max]

Bright pink Progressive rear spring for 85/86 250R. Awesome update to a stock rear shock.

[andnuaa]

Here are some of my rare parts

http://i248.photobucket.com/albums/gg172/andrewpics2/ebaystuff179.jpg?t=1222197525

[mike from long island]

Where are the rare parts?? All I see is a couple trip meters,speedo heads and a headlight guard for I think a 350x.The only thing I am not familar with is that red bar piece. Just kidding about your parts too. :w00t: They arent a dime a dozen. Look like you dont plan to use them??



Here are some of my rare parts

http://i248.photobucket.com/albums/gg172/andrewpics2/ebaystuff179.jpg?t=1222197525

[dizasterzrfun69]

Bright pink Progressive rear spring for 85/86 250R. Awesome update to a stock rear shock.

i too have one of these but it was painted blue, i started taking the blue paint off and took off too much. it is now blue and pink and i think even a little bit of flourescent orange-ish. I also have several speedo heads, drives, and kits, a used 300r kit, and of course some Nos headlight guards. Im sure i have more but its all up in the attic.

[chris200x]

Rare? Go out riding for a day anywhere and tell me how many other black and red 350x's ya see. :naughty: :w00t: :welcome:

[edog]

The only thing I am not familar with is that red bar piece.

That little red thing mounts to the side of the fender to guide the speedo cable.Those are rare.They usually are lost with those hondaline kits.

[schuhboy]

A buddy Found 2 86' 250R motors in a closet at the school he works for. they told him to throw them away!!!! He grabbed em' and brought to the house. I was able to buy one for $200.00. The other was traded for a fourwheeler. The motor I have has never been touched. Still has the hacked off cables hanging from it. Complete with vin # on a hang tag.

[Gag_Halfront]

I have three sets of these hard to find OEM tires pictured below











































:D
http://www.carlisletire.com/products/atv/trailpro/product_large.jpg

[Tri-Z Pilot]

i swear with all these talks about trail pros they are gonna need their own section,lol. great rare stuff guys, im surprised indiana jones wasnt caught posing in any of these pics:D

[freaksfix]

Got enough Armor All on the shelf there, Edoggy?? :lol: :lol:

-Nick :TrikeOwn




And a box of diapers, must be for when he is waiting for paint to dry and dont wanna leave the shop... lol

[maggiesboy]

Got enough Armor All on the shelf there, Edoggy?? :lol: :lol:

-Nick

It is written in his sponsorship packet...... Krylon and Armor All must be shown in every picture, or his lifetime supply stops instantly. :D

['83 250R]

west coasts swinger for a 83 250r, dg boost bottle, steering stabilizer, durablue axle for 83 250r

[SeaBass8]

Is this rare enough? Supertrapp for the 86 200x.

http://i38.photobucket.com/albums/e124/SeaBass888/SuperTrapp.jpg

[maggiesboy]

Is this rare enough? Supertrapp for the 86 200x.

http://i38.photobucket.com/albums/e124/SeaBass888/SuperTrapp.jpg

are these rare? I bought one for $35.00 :D:D:D:D:D:D

[SeaBass8]

35 Bucks!!!! You stole that thing!

[rasorroad250r]

My Rare stuff would be a WAX ON desert seat for my 86 R
Honaline speedo/odo for my 350X
+2 cal fab swingarm for my 84 tecate
+6 finishline axle for my 84 tecate
some 2 piece quick change sprockets (sidewinder)
Nasa fork pre load adjusters for my 86 R
PRM skidplate for the cal fab swingarm on my 84 Tecate
Full on Honda mx spec ported and polished cylinder for my 86 R from a former Honda mechanic.

[greythorn3]

i got these huge baloon tires on my atc 90, i was told they are rare


Ray

[VenomRS4]

Heres my rarest trike. 1987 Tecate 3. She's a resto project that I will be tearing into when I get off this damn ship.

[edog]

Heres my rarest trike. 1987 Tecate 3. She's a resto project that I will be tearing into when I get off this damn ship.

Wheres the pic?

[Mrs.Mosh]

I dont know how rare these parts are but...


1 Old school Tri-z jersey signed by Brett Driscoll (Tri-z racer from the 80's)
LRD silencer for 85 250R
2 sets each of NOS purple Maier Front fenders and Rad shrouds for 250R
Answer Silencer for Tri-z with spark arrestor



And this...It now belongs to one of our good friends,It was never mine,But I made it and Jimmy Signed it.

http://i100.photobucket.com/albums/m40/cosmicquads/Jdub2800.jpg

And I know these are rare.....Only one set ever made in this color.We still have these.

http://i100.photobucket.com/albums/m40/cosmicquads/Zbox800.jpg

http://i100.photobucket.com/albums/m40/cosmicquads/Zrads800.jpg

[NINJA]

Don't know if these are rare:
Progressive Suspension fork springs for an 86 200X
Gold D.I.D. 8in rolled edge wheels that came on my 200R
I once had an 86 200X with a White Brothers rear shock

I have a plus 2" Westcoast swingarm for an 86R
Of course the full Selvys 200R stuff on my trike: hand coned pipe, silencer, bored out flatslide carb, shorter crank, heavier flywheel, shorter cylinder
Also have that 213 grind Webcam , Kibble White valve springs and titanium retainers, 11:1 compression 68 or is it 67mm White Brothers piston for 86 200X
Ive had alot of rare 250r pipes too, just check the threads.

[Hoosier_Daddy]

OEM Tecate radiator shrouds.

[edog]

OEM Tecate radiator shrouds.

They have those on the shelfs at the Kawi dealer by my house.:naughty:

[mike from long island]

Well here is a fuel tank for the Tri-Z and the old school Blue Duro tires.

[scooterroo]

my rarest peice...

NOS Bassani headpipe for the 84/85 t3. never been used!!!
not sure how rare the Answer Hottip silencer is but i havent seen any others in quite some time.

http://i67.photobucket.com/albums/h315/scooterroo/bassani015.jpg

[mikeftlaud]

My rare or different stuff would include my 200R with moto-plat ignition and short track tank and 2 extra 200R seats. TriZtunes just bought one from me. Three custom 200R pipes made by Bill's,Selvy sectional,and Paul Turner. Each for a different race set up. I would have to consider my restored 250R semi-rare just because I bought so many new OEM parts and all plastic. It has a chrome Bill's 250R pipe which you cannot hardly find with a coffmans silencer. I have a set of the Blue duro tires not mounted. 250R short track tank and shrouds with out the mounts, The white 250R front overfender still in the package, the metal front fender stabilizer still in the pack. 250r headlight guard and the glass protector screen. I have 3 '85 250R seats, one is like new. I have original 1984 and 1985 ATC hondaline accesory catalogs. 250R ad's. Tecate 3 brochure and ad posters, and a bunch of other old promotional stuff. I will have to go and look through it all to see what is there. Just sold most of my Tiger parts. Still have the rear fenders,radiator,number plate, frame,forks, rear brake set up, and maybe a couple other parts. Nothing really rare about my 85 Big Red except maybe the trailer hitch. I will have to go look through my boxes and see what else I have. I will post pictures of what ever I have stored in my computer now. I have some that i will have to resize. I think the only pics already resized are the 200R and 250R. I live in a town house without a garage so all my stuff is stored at my parents house.

[Vealmonkey]

Tiger front number plate!? I'd like to see that.

[erectordale]

well I thought I would post this up before I put my baby on ebay. these pics was taken just a half hour ago. I think the Tiger 500 would fall in the rae class of trikes

[seadoo650]

I think this might qualify as rare. Cal-fab +2 swingarm for the 83-85 200X. I've only seen two of these(mine and Louis) and heard of one other.

The pic is of Louis's after being polished.

[trizilla]

not sure if this qualifies but you dont see them everyday.... from an atc 90
http://i237.photobucket.com/albums/ff223/ericandwendy/100_2875.jpg

i also have a joker/bandito frame, aftermarket front end with aluminium trees and some type of bike forks, and a bassani exhaust.

[4 wheels?]

well I thought I would post this up before I put my baby on ebay. these pics was taken just a half hour ago. I think the Tiger 500 would fall in the rae class of trikes

Damn, That sure is a nice Tiger!

[the tecate kid]

1st gen. TECATE parts: u.f.o. airbox, WP rear shock, durablue hubs and 6" over axle, front tri-trac tire, roost boost, +2 chrome franks swingarm, +4 westcoast swingarm, complete bassani exhaust, complete klemm research exhaust. Big Red parts: every single possible hondaline accessory made.

[edog]

1st gen. TECATE parts: u.f.o. airbox, WP rear shock, durablue hubs and 6" over axle, front tri-trac tire, roost boost, +2 chrome franks swingarm, +4 westcoast swingarm, complete bassani exhaust, complete klemm research exhaust. Big Red parts: every single possible hondaline accessory made.

:drool: :drool: :drool: :drool:

[the tecate kid]

Hey edog I just noticed the Hurst/Olds avatar. Slick! I love all the g-body cars. I have 2 1986 pontiac 2+2s "one has t-tops, 1 of 37" and an 87 buick t-type. No olds yet, but still looking.

[thefox]

I still have my YTM200 rear suspension kit, 1 of 3 I have seen.... I one the auction for one of the other ones on ebay but it was never shipped.:(

http://i259.photobucket.com/albums/hh293/thefoxman45/PICT0026.jpg

I also have a Kerker pipe for the YTM200.

http://i259.photobucket.com/albums/hh293/thefoxman45/PICT0057.jpg

[Vealmonkey]

I like that suspension 200. Very different from the yt125 and 175 though. Of course I like all the old goofy stuff.

[maggiesboy]

well I thought I would post this up before I put my baby on e-bay. these pics was taken just a half hour ago. I think the Tiger 500 would fall in the rare class of trikes

wow :( I sorry you need to sell this Barbie of a trike.

[atcquebec]

Here's pic of my commuter ''Sasquatch'' 340 1984

[gotballs 250r 82]

THE fox that a works shock good find i have one on my R....

[freaksfix]

I still have my YTM200 rear suspension kit, 1 of 3 I have seen.... I one the auction for one of the other ones on ebay but it was never shipped.:(

http://i259.photobucket.com/albums/hh293/thefoxman45/PICT0026.jpg

I also have a Kerker pipe for the YTM200.

http://i259.photobucket.com/albums/hh293/thefoxman45/PICT0057.jpg


Is that the one you got from me? That was found in a atv bone yard, the guy thought it was home built hack job..

[Saul]

Aren't us guys running Gen1 R's a lil 'rare' ?! LOL!

[fabiodriven]

:shiftyeyes: Trailpros:shiftyeyes:

(Sorry Edog, had to do it)

[mike from long island]

Aren't us guys running Gen1 R's a lil 'rare' ?! LOL!

Here ya go bud!!

[Saul]

Here ya go bud!!

HELL YEAH! That old school fairing is kinda badass. Saw one on ebay - had a half a mind to snag it.

p.s. - got an extra seat kicking around? LOL.

[the tecate kid]

What a beautiful bike Mike!

[dcreel]

I've got one of those fairings in white for a 200X

[edog]

I've got one of those fairings in white for a 200X

in white:wondering

[mxnick]

I have every ATC mag printed from 1980- thru June 1987, along with all the Hondaline ATC cat's. One of these days ill get some pictures/scans going of them.

[freaksfix]

1st gen. TECATE parts: u.f.o. airbox, WP rear shock, durablue hubs and 6" over axle, front tri-trac tire, roost boost, +2 chrome franks swingarm, +4 westcoast swingarm, complete bassani exhaust, complete klemm research exhaust. Big Red parts: every single possible hondaline accessory made.



What about your Cal Fab tank? At TF i noticed you had your Big Red Hondaline mud flaps zip tied on, do you have the mounting kit for them? If not I think I still have a used kit kicking around somewheres if you want them i'll hook ya up, i had a NOS mounting kit but i sold them awhile back.

[Autophysn]

Does this qualify?

http://shutter03.pictures.aol.com/data/pictures/17/003/57/FF/22/92/slUoY4mVcv9pVfjFlOXRDrYofWRyOAUR0300.jpg

http://shutter02.pictures.aol.com/data/pictures/17/007/65/D6/0F/1C/8FOzPr5DmExp0MdJzEh1kU+uSktjRujD0300.jpg

http://shutter01.pictures.aol.com/data/pictures/20/001/6D/92/53/40/aoInXH-l5csnomwXhPhv3WmYOJAI+ycv0300.jpg

http://shutter02.pictures.aol.com/data/pictures/17/004/3E/97/99/66/-2BBH+HxhGfIRfGw6j2dVvKiixBT7YcK0300.jpg

http://shutter04.pictures.aol.com/data/pictures/18/008/6E/A6/F2/98/lgNklHqczPX6CTQedfEoObSjXtM7v-hW0300.jpg

Talking about the exhaust, these are all the best pics I could post, honestly, cause I just got the bike. Only have a few pics as it is.:Bounce

[rasorroad250r]

looks like a selvys exhaust.

[the tecate kid]

Thanks freaks, I do have the kit, the reason I have them zip-tied is because I have that larger-extended rear rack on the bike, and the kit wouldn't work with it. I also have a canadian version ATC 110 with FRONT SUSPENSION and complete hondaline spedo kit on it. I think its rare, cant say as I've seen another one.

[roger86200x]

How about a Durablue +2 swinger for an 83-84 250r. Another of 1upfronts finds.
http://i39.photobucket.com/albums/e183/lrdunlap/100_0081.jpg

Ive got one of these too! I dont know the brand but it looks identical except not as ...new.. lol

[mike from long island]

What a beautiful bike Mike!


Thanks I hope to get around to rebuilding it.I have a few boxes of aftermarket parts.Those pics is just how the bike sits now until I find time.

[Tecate250]

I have a set of 8 inch mitchell rims for a 84 tecate
Franks +2 swing arm
Some sort of aftermarket axel that is 5 inches wider then stock
And the super rare trailer hitch for a tecate:lol: :lol: :lol:

http://i287.photobucket.com/albums/ll148/Tecate250/IMG_1345.jpg
http://i287.photobucket.com/albums/ll148/Tecate250/IMG_1338.jpg
No good pics of the axel or rims yet.

[Yamatrike400]

Here ya go bud!!

Nice R! I tried an answer silencer just like yours on my stock pipe, and it ripped pretty dang good!