What did you do with your trike(s) today?

[bcredneck]

didn't do anything with mine b/c of a broken wrist, but I did drive out and looked at four TPC's in one place at the same time :naughty:

you can still ride with a messed up arm just set up your controls like the pic pop a few painkillers and get riding
http://www.3wheelerworld.com/attachment.php?attachmentid=112822&d=1293935401

[RapidRick]

thank you, no. it's the left wrist, and i prefer to let it heal.

[bcredneck]

i did that after i bruised the bones in my right arm and 6 months before that i broke both those bones and had them screwed and plated back together and i never stoped riding i needed lots of painkillers thou
http://www.3wheelerworld.com/attachment.php?attachmentid=115564&d=1296585780

[ama009]

Took the engine out of my 200x to see why it locked up!

[pantera1975]

http://i287.photobucket.com/albums/ll124/tankispmaximus/184745_1913784403551_1210166712_32268271_1757566_n .jpg

Sweet wheels

[vartz04]

spent 4 hours yesterday and 2 hours today checking everything on my 225dx, trying to figure out why it won't start with the electric starter (pull starter broke)

gave up yanked her in 4th gear with the john deere fired right up....so i let it idle called the neighbor and went for a 3 hour ride. I love this thing even though that starter is giving me trouble.

[RapidRick]

put a 200x in CL

[hillbilly 200x]

I got my first 250r a few weeks ago, so I got it out of the shop and running today, took her for alittle rip at the school across the road and had at her, this is my first 2-stroke... holy crap it was power......

[oscarmayer]

well today was one hell of a day. morning my son and his teammate raced the peewee class in cross country racing. pretty rough area and I'm supprised at the hills they had the kids climbing. I played chase/support during practice day before and support during the race. this did NOT prepair me for what was to come on the BIG adult races in the afternoon my friend (teammate's son's dad) ran. I knew they raced cross country, but holy Chit!!!!! They ran hills and areas that were up the sides of a mountain and back down. it was krazy!!! 100X more tuffer than the kids stuff. I ride my triek all over the place during practice to support and also during the race to support my friend. My hopepd up big red definatly shpwed it's true teeth today! it not only handled everyhtign I threw at it w/o a problem, it went palces evenn the heffer 4x4 quads could or would not go. LOL that thing is AWESOME! and nimble as cat with the strength of a Lion on the prowl! I had a blast and probebly as tuff or worse a time than the racers cause half the places I went, there wer no trails I made my own! LOL
anyway, it was an awesome weekend and we loved every moment of it!

kids came in 4th and 5tha nd friend came in 4th. not too bad a race weekend!

[booblinker]

Got the 350x started, it idles and seemed to rev well with no load, we'll see how it does when I get a chain and airbox.

http://www.youtube.com/watch?v=RwO1KUqsyGQ

[TheRealFatShady]

Got a dirtbike so my SX isn't lonely in the garage. $100 XR200. Took the engine out to find why it was seized....someone broke the tip of a flat head screw driver in it. Seized the piston. Got it freed, cylinder is good, had to grind a little off the piston so it didn't protrude but it's good now.

[tx200m]

118430118431 Put some Maier plastics and some decals on. PRM grab bar too.

[bugler30]

Rode my 350x for the first time in about a month. Felt good and reminded my why :TrikesOwn SO much snappier than the 400ex, not as fast but that is because of the way I have it geared.

[sx250heath]

Tore into my 200X only find that cylinder and head are warped from the last owner letting it sit and leaving old oil in it

[MNATC]

Went out ice fishing with the BR. After the fished stopped biting, it was time to have some fun on the lake saturday and sunday.

[atc350xer]

Grabbed a bunch of spare parts and built a 90 frankentrike just for kicks... I love having the parts lying around to add another to the stable!

[3boyswinter]

Tried to see if I could get my 200x stuck. Took all day, it was close. The last mud hole was as deep as the seat.
119633119630119631119632

[sittinguy]

Since I have 2 350X's now, I have been alternating between them. They both have the same 36 toooth rear sprockets, stock 22 inch rear tires. And they are Alot different . The one with the 12-1 piston and the cam has alot more low end, but does'nt like to wheelie in 6th, the other on just has an 11-1 piston, no cam,, and it will bring the front end up in 6th no problem.

I am still having jetting issues with the first one. It is running lean on the top end. It runs great though.

[Thorpe]

Ordering new handlebars and grips... Dang snow bank got the better of my current bars...

[grover2044]

Recovered my seat on the YTM 200... Installed a tube in the rear tire... trying to figure out a battery box that will hold a lawn and garden tractor battery... Thats about it lol

[racer....X]

Picked up another 70 today. Needs a little work but got it pretty cheap. Another project for down the road.

[trikenut3]

Walked outside this morning and realized I had been robbed . Something found the granola bar that was left over from the last fall ride in the trunk of the 200S. It was smart enough to pull the strap to open the lid but was so rude to leave the chewed up wrapper and not close the lid . Ungrateful I tell ya ...

[RapidRick]

Finally got an exhaust system on the 500X now to finish the wiring and put a chain on it. Prolly will take the 86R F/E off and put a 200X front end back on.

[Ol Deuce]

Put the new top end on my Tri-Z .......

[Ol Deuce]

Fired you my '83 atc110 & I thought it was a 2stroke...................

[RapidRick]

This one is out of the trailer for a lookyloo today.

[mtsnieg]

Took off the ice tires and put on the dirt tires.

[vartz04]

Well last weekend i put a piece of a steel post thru the sidewall of my front knobby on my 225dx, coulda tubed it but a tube was $20 and a new front carlisle knobby was only $40 at farm and fleet.

Sandblasted and painted the wheel wednesday and mounted up the tire today in the garage. Went for a ride...super muddy.

I love this thing, Starts up first pull almost every time no choke nothing. Hopin to do some more riding this week.

[RapidRick]

Made a list of what needs to be done to get this back on the sand for Easter weekend

[booblinker]

Took my 350X for a ride yesterday. Today, got both the 200s's running and rode them around my buddies yard a bit. Pulled all 5 trikes, and golf cart/quad abomination, and a bunch of other stuff outta my buddies barn, so we could reorganize. With organisation we have 5 trikes, 2 snowmobiles, an F450, and the golfcart/quad abomination, we figure we have room for at least 3-5 new three wheelers :Bounce
http://i99.photobucket.com/albums/l318/booblinker/3%20wheeler/dcb28ca9.jpg
http://i99.photobucket.com/albums/l318/booblinker/8f0fb441.jpg

[MonroeMike]

Ordered Yamaha clutch parts and a Honda recoil spring.

[MNATC]

Today I'll be recovering the seat. Over the weekend put on the new maier front fender on the BR. The new fender looks 10 times better than the old beat up one. Took some finagling and triple measuring before drilling. Very happy with it.

[Big Sal]

I pulled the final drive apart on my 250sx...what a nasty job...the pinion gear is toast so is the bearing and the housing....I just bought it...looks like I'll be swapping out the center section from my parts bike and installing new swing arm bearings....along with a loooong list of other things....lol

[saki160]

I finished up putting together my KLT 160s engine today after cleaning it up and powder coating some parts on it.

[yooperman]

i finished making my new chain slider for the 86 kawaski T3, for the calfab swing are, and got it mounted on the calfab.

[YoungJay]

i finished up painting my plastics and put them on my bike and went for about 10 mile ride :D

[tanks350x]

I just ordered a new PRM Skid plate for my X The absolute final thing I have to do to it!!!

[booblinker]

Found out my three wheeler floats after it bucked me off in some waist deep water, also found out the water is really cold in march.

[sx250heath]

crashed my 250r for the first time today

http://www.youtube.com/watch?v=0g4cRzprMPc

[TheRealFatShady]

Stripped my SX partially down for it's big upgrading.

Need a driveshaft boot, swingarm bearings, might rebuild the differential and get axle bearings + brake shoes while it's apart.

Ordered the swingarm bearings today.

[honda200x1987]

Pulled my 1987 200X out of the shed today and stood there looking at it with drool running down my chin. I am itching to install a NOS OEM rear fender but I am waiting for Harlan to get back from Vacation in april so I can order some decals for it. Wish I could get my hands on a set of OEM HONDA decals for this model ,only the fuel tank decals are avaiable.

[big red hemi]

installed a 27 mm carb and intake on my 200x. then did some third gear wheelie.
what a great upgrade

[1984 honda 200s]

installed a new carb boot o-ring on the 84 S, adjusted to rear breaks and took it for 1hours spin, got it home listened to it idle, shut it off and started it back up again. then went and ate supper LOL.

[Modding_out]

Went rock crawling in my property with my KLT 185. First time taking on larger builders besides the regular broken down rock wall, it did really well....just requires a lot of balancing and the mind set that your OK if the tirestrailpro suddenly grab, you might be pitched off:naughty: gonna make a real thick skid plate for it before i try it again.

[RapidRick]

Soaking two carbs in solution. Ordered two kits for same. Measured 500X carb for hose and K&N filter. Relisted 200X on CL.

[Chazz of Blades]

Getting ready to do a few things to the BR today.

[mtsnieg]

Took the 200x out to a buddies place to run it around the 50(pit bike) track. Loads of fun till the end of the day. Showing off on the plateau, went too wide around the berm and clipped a tree with the right rear wheel. Bent effing axle. Shoulda known better.

[JasonB]

contacted a local to try and get a better deal on powdercoating and sandblasting so i can get my build underway! waiting on qoutes to come back

[oldtime3wheeler]

Didnt do anything today, but broke out one of the 70's yesterday and ripped around the yard on it.

[BIGREDGUY]

Fixed the ignition on the 125 and took the BR for a spin.

[ridered86]

Stared at it with the new-old plastics from an XR and Fourtrax. Wished I wasn't broke so I could get the carb rebuild kit and rings. Sat on it and at my breakfast.
Wow... I sound like a loser. :P

[Chazz of Blades]

Took a lady-friend out for a long, rough ride today. Sometimes that hardtail Red o' mine comes in handy.

[atc350xer]

Fixed my BR carb, got the 90 tuned up, fired up the 70/125 just because :D

[350XJEDI]

:) took a long ride up the mountain on my 350x , lots of snow up higher , plenty of mud on the trails , perfect day , then spent a hr washing the mud off was a nice break from work .:beer

[Crash5291]

Cleaned the motor up some, found a xr200 cam for $25, noted that my fenders are crack free.

[RubberSalt]

We had a big party, a lot of my family was over riding around on the trikes.
We lined up the 1983 KLT200c and the 1985 Honda 200m, Tied about every race.
Everyone was playing on the 1980 YT125.

The clutch baskets on my heavily ported YT175 blew apart - destroyed. - to much power :)

[Chazz of Blades]

Hehe, 125 Tri's are so much fun. Out of all my trikes the 125 is probably the most fun to play around on. Now I just need to get it ported......



Discovered that the previous owner of my 200es decided to remove the cam cover for some reason, and instead of a gasket used silicone. So now I need JUST a cam cover gasket, anyone have any laying about?

[bcredneck]

cut one out of gasket paper ive only bought one gasket in my life

[Crash5291]

Just went out to grab the vim off my 200 and the plate is gone. . . . i know it was there when i bought it like 10 years ago because i matched the vin to the ownership i was handed before i paid the man.

Hope this hacked frame i am picking up has one or im going to be livid

[trikenut3]

I got to trailer it to a job site and watched an employee spread fertilizer and aerate a lawn with it . Felt like watching someone else put the moves on your girlfriend ; I was jealous as h@#* !!

[not-a-virus.exe]

looked at it sittin i the garage just waiting for a new powerplant then i found one from a member on ebay shawn.m also airbox and carb wooo hooo

[RubberSalt]

Spray bombed the KLT200 with another coat of metalic blue. Welded up the front rack from a Polaris 350l trail boss onto the back of the KLT, also added a wip mount to the rack. Painted that rack black with a light metalic blue mist all over it, gives it a neat look.

Ran out of gas on my YT175. Got a flat tire on my 200m.

[jamminjimmi]

I finished welding up some brackets to my 200es so that I could attach my 200x cooler rack on the back, and put on my gun mounts.The cooler rack I bought off of e-bay without realizing it was for the wrong model! Oh well I gotta have some cold drinks when I'm laying low waiting for some hogs or whatever to come out, Red is ready to go hunt now. If I keep it long enough I may repaint/powder the whole thing
http://i492.photobucket.com/albums/rr287/jamminjimmi/big%20red/DSC00622.jpg
http://i492.photobucket.com/albums/rr287/jamminjimmi/big%20red/DSC00621.jpg
http://i492.photobucket.com/albums/rr287/jamminjimmi/big%20red/DSC00618.jpg

[snakpacs]

http://i16.photobucket.com/albums/b46/snakpacs/2011-04-099517-09-5395632.jpg

http://i16.photobucket.com/albums/b46/snakpacs/2011-04-099517-09-3895500.jpg

[lomaxpeter]

Bought a susuki 50, tried to get our tri zinger going with no luck. I'm going to check the oil injector next, any ideas out there would be helpful. Lots of spark, good gas and compression. We rode the the 250 r(fire1) and the 350 x(zhumeka) my Tecate(rosscow) waits for a new day

[Chazz of Blades]

Instead of checking the injection, why not just mix a bit of gas and see if it runs correctly?


@SnakPacs
What exactly the hell is that?

@JamminJimmi
Wow, you just made my 84 Red cry.

[snakpacs]

its a frankentrike! 86 200x with a blaster engine. just about finished it today. check out the thread called something along the lines 'blaster engine in 200x'

[not-a-virus.exe]

that 200x is nuts...... i like it

[Chazz of Blades]

Huh, I didn't think a blaster engine could pull two trailpoos.


The more you know......

[Modding_out]

Went over the neighbors house and rode 3 wheelers with him.....in love with his 350x....

Jamminjimmi....I'm loving the winch man :)

[RubberSalt]

Got the lighting figured out on my 200m. Took it for a test drive. Everything seems to work so far.

Dunno why people had to chop my wires up prior to selling it.

[RapidRick]

Between two 200Xs - Changed seats, installed rebuilt carb, changed tanks, found that I need to rebuild a rear master brake cylinder :(

[pmktm]

Lets see, yesterday I washed one of my 85s. And today I helped load it into a pickup for a trip to its new home. I have had this trike since October of 84, kinda sad.:(

http://turnsleft.smugmug.com/Other/ATVs/IMG0693/1183599151_9SLQF-XL.jpg

[Crash5291]

Lets see, fixed the kill switch the little ball was gone, changed out tires and managed to install the front with the valve stem BEHIND the brake GRRRR

Umm fought on the phone with my bank over my royal distributing order. STILL trying to get my stuff paid for ....

[MNATC]

Over the last few weeks, put on a new front fender, primed, sanded, cleared a new to me OEM tank, beverage holder, re-covered the seat, and repositioned the headlights. Brought it out of the garage today to bucket wash as it's a little nippy to hose wash it.

http://www.yzf600r.com/phpBB2/gallery/d/25396-1/Picture+011.jpg

http://www.yzf600r.com/phpBB2/gallery/d/25399-1/Picture+013.jpg

[mrmello]

Cleaned the carb at 7 am, Installed it, tested it and Installed the plastics, Took it out and rode the crap out of it to see if it would stand up, Worked like a charm!!

http://i1203.photobucket.com/albums/bb397/atcriders/Trikin%202011/p_00110.jpg

[Crash5291]

Lets see, took the 83' out for a rip to see how the Gators worked, there not to shabby but i need a 10t front sprocket 11t is to much rode most of the time in 1st gear but needed to be in 1st and a half lol

[TatTooL23]

Yesterday I put an original thumb throttle on my '82 250R. I bought it from a member here after months of looking. It had a twist throttle. Now she's back to COMPLETELY OEM stock (well except tires). I love it.

[ridered86]

I got the 90/90 to the shop, pressure washed 20 years of barn dirt off, sold the 200 after that, and spent most of the money from it on the 90/90!

[Xpress]

Between yesterday and today I stripped off the goodies I needed from an 85 parts bike, which included the engine, the exhaust, the rear shock (mine was toast), the tank shrouds, and the rear fender. Threw it all into mine, and breathed new life into my 200X. The difference between my old shock and the new shock (aside form the 85 being blue and not red) is NIGHT and DAY difference!!

[grover2044]

Whacked, banged and swore trying to get the rear axle/brake drum off on 200s... More to come tonight I am afraid...

[MagicJames]

Brushed dirt off of the seat of my 350x and shuffled some 250r parts around on the shelf. One day she will live again.

[jrsqlc]

was doing a fourth gear wheelie through a field, hit a bump and came back to far....350x hit the back bumper spun sideways dug into the dirt and went flipping.....didnt do any damage besides threw chain...which was cought by case saver...and i found the left tube by motor mounth cracked.....so gotta strip it to weld up and gusset.

[TatTooL23]

Today I finally got my PRM skid plate mounted on the swing arm of my 350X. This time I loctited the bolts. They vibrated out last time.

Then on my newly acquired 1986 250SX, my father and I welded the muffler back on where it was INTENTIONALLY cut off by the previous owner because it "sounded cool." I also cleaned the air box completely out. And got rid of the homemade air cleaner that had mud inside of it past the filter. Gonna have to compression test this one.

[KASEY]

today....... we rode

http://i1141.photobucket.com/albums/n592/KASEYII/DSC00062-1-1.jpg

http://i1141.photobucket.com/albums/n592/KASEYII/DSC00149-1.jpg

http://i1141.photobucket.com/albums/n592/KASEYII/DSC00145.jpg

http://i1141.photobucket.com/albums/n592/KASEYII/DSC00139.jpg

http://i1141.photobucket.com/albums/n592/KASEYII/DSC00067.jpg

[Creek_01]

washed it, waxed it. took it for a long ride down a beutiful Texas trail. Banged my gf on the back. God Bless Texas.

[ridered86]

Traded it off for a Big Red! LOL

[Deathrocket]

lets see, saturday finally put my 250r back together... ran it, and I rode my girls 250sx.... today is get them running right...

[TatTooL23]

Yesterday I put an OEM air filter in my 250SX and also put a battery in it. Clean air and electric start. Now I have to get the dirt bike front end off of it. Lol.

And today will be 350X day hopefully.

[falloutboy]

new shoes:
http://img34.imageshack.us/img34/84/img2192bt.jpg

[oldtime3wheeler]

Nothing today, but yesterday I used the Big Red to do lots of yard work.

[Thorpe]

Tore around on the kids 70, painted the exhaust and modified the spark arrestor a hair...

[pantera1975]

I just looked at my 86 R, wiggled the handle bar and said I hope you can be quiet enough with the big bore so I can ride you on the trails.

[DonDelusion]

HONDA ATC200s

Got it running after carb rebuild. Hunted down a fast idle prob. And alas.....discovered that the frame is cracked behind the right footpeg. Complete break. Oh, the humanity....:mad:............:(

[NOSBIGSHOT]

I looked at mine ...and wished they were 86 250R's .

[Sparkplugkid]

got my 1980's Yamaha Tri Zinger going I baught for 100

[Chazz of Blades]

Walked half asleep at 6 this morning into the shop, saw a huge gas puddle under the 200S, kicked the trailprotrailprotrailprotrailpro out of it, and went back to bed.

[tanks350x]

Took it out, rode the snot out of it!! It handles so much better with the new forks on it!!!

[Tuff]

I took the day off, and took my 83 200E fishing. we caught nothing but had fun riding. I gotta get some pics up of my trike. kinda hesitant to do it, because I ain't what ya call rich, and it doesn't look as good as the bikes on here. she runs perfect though and everything works on it like it did the day it left the factory.

I still have a lot to do on it. so far I have new axle bearings and seals, new batt, new rear brakes and new Vesrah clutch plates.

also I drilled the rear axle tube and put in a zerk fitting and filled it with grease.

I put a homemade front fender on it, that must be seen to be believed,LMAO! next is a new steering stem Tapered bearing kit from Moose Racing and cables for my hand brakes. found the cables on Ebay for 16 bucks each shipped. then I want a new plastic tank as my old one is patched with JB weld for now.

the forks were shot at one time and must be the wheel would fall off because someone drilled holes thru and put bolts in in each fork so a good used set of forks are down the road as well. its my primary rider, and I'll take it anywhere. she SIPS gas and runs great all day with nary a complaint.

this winter will be fresh paint and new decals. yes lol, those are Arctic Cat Ski loops holding the fender off the tire lol, it works great (for now) till I get my real fender. sorry about the crappy cell phone pic!
http://i489.photobucket.com/albums/rr260/GreenStreak_2008/83200E.jpg
it has 25" tires, was that the stock size?

[just ben]

i took the top end off only to find the piston shattered and a bent rod. Then cried (on the inside)

[250Eddie]

http://i1118.photobucket.com/albums/k612/MudLife305/IMG_0510.jpghttp://i1118.photobucket.com/albums/k612/MudLife305/IMG_0512.jpg

[Tuff]

I raced a 2011 350 Yamaha Wolverine (2wd) with my 83 200E today. he beat me on take off and going up the gradual hill.

we raced down the hill, he still got the hole shot but once I got into 5th gear, I walked right on by! so proud of the ole girl!


BTW, this was a private road we raced on and helmets were on our heads.

:beer

[Thorpe]

Changed oil on the kids' 70...

[carsurgin]

Filled up the tank and gave the mud hell!!! Then she bogged out on me and I couldent keep her running for more them 10 minutes. So I spent rest of the day trying to fix her. Oh ya, big red got 16 stitches today as well. And Install foot pegs on fenders so kids have somewhere to put their feet while riding on back. Ill post some pics tomorrow.

[ama009]

Took the front forks apart for my tri z to rebuild them after straightening them on the press!!:D:D Nasty oil inside (probably in there since 85):(:(

[tri-Z ripper]

Just rebuilt one of 5 mini's lol this is an ugly one believe it or not!
http://i66.photobucket.com/albums/h265/german0024/dc3e64db.jpg

[Thorpe]

200X frontend being bolted onto my SX!

[dougspcs]

Got my Big Red ready of the white stuff!!! Snows a comin!! Thorpe you know what I'm talking about..
127580

Haha, just kidding. Installed the plow on my new 250es to make sure all the parts were there..

Selling the plow and wanted to be sure it was complete.

[Thorpe]

127606 Never took mine off! This was just taken yesterday! (JK, its 92 here today)

[ama009]

Emptied my gas tank last night. Poured some vinager in there and let is sit overnight. Looked at it this morning and that sucker is CLEAN where the vinager was sitting. After work today, I have to finish cleaning that up. Hopefully can ride this afternoon!

[dexterr]

i went ordered a new dg exaust system for my 200s, then after that i went and took off the flat tire

[Swinger]

I petted mine and whispered "soon my precious" waiting on my carb rebuild kit and kicker!!

[buzzy613]

put it together and ran it with no brakes lmao

[Fonzi]

Pulled the rear brake assembly, cleaned and adjusted. Thought about how much trouble I would get into running through the empty lots in the subdivision. Wish the were more open places to ride near Omaha.

[atc200xkid]

ordered a spring for the kickstarter for my 85 200x off ebay believe it or not, NOS! then looked ot the tore apart engine of her and the other 200x, also waiting for a spring. then tore up a field on my bros 350x and raced my cousin on his 85 200x. then looked at the 70 and wondered why it wont run right, but it doesnt have to till christmas when i plan on letting my 3 year old brother ride it for the first time, but he;ll be 4 by then so its all ok. and then i moved the parts 200x to the storage loft in the barn so i have a lil more room in the 3 wheeler shop to work on trikes!

[tecate_gt5]

i started up the 250r ripped around to the back yard (the side where its the neighbors i dont like) and roosted some dirt on there sheets they had hanging to dry on the other side of the chain link fence then put it in the garage wiped it down cracked a beer sat down and stared at it :)

[rdlsz24]

I lined mine up in the back yard and took a picture

http://img.photobucket.com/albums/v603/rdlsz24/ATC/DSCF4009.jpg?t=1318242900

Rob

[kylegrimes]

I cleared my frame and watched it dry wishing i could ride

[stevensj13]

Nothing today but yesterday I pulled the 1985 Tri-Z out of the garage, popped the clutch, loosened that up so it works now, found a coolant leak, and set up a time to buy some parts for it today!

[whyzee]

Picked up a 400EX. It has a flat tire so does that count for 3 wheels? :confused:

[Chazz of Blades]

A buddy of mine lost a wheel on his FourTrax, does that count? I had to hold one corner up and walk him back home.

[just ben]

took the engine out of an 85 t3 runner to put in an 85 that I have been building that blew up after 2min. or less off running.(I didnt build the engine) that would be "250tecates"handy work

[86T3]

oh crap, that sucks ben. How bad is it?

[Jon Boy]

just sitting in Charlotte NC right now daydreaming about flat tracking the 70 i just got so i didn't do anything, but hopefully my buddy back home got my exhaust welded/painted/bolted back on, new thumb throttle mounted and new grips on the 125 today.
hopefully he didn't need to order a new throttle cable also. :wondering

[just ben]

oh crap, that sucks ben. How bad is it?lower rod bearing went.Took out the rod,piston and cylinder on the way. pretty effed! cylinder wouldn't be bad since it was a fresh plate but it was a kx cylinder and cracked the exhuast bridge. I'm so glad this motor was gone through "top to bottom" and the clutch was junk to boot.I'm glad he "got out of trikes" so nobody else here will have to deal with what I have

[86T3]

That sucks. I thought you got a decent deal too. Hopefully you can find an engine cheap. This is what i did today
http://i1117.photobucket.com/albums/k581/joeswatland/restoration/S5001271.jpg

[RapidRick]

Put a 350X shock on my 85 200X, changed carbs, rejetted, rebuilt rear master cylinder, ready for Tday at the dunes.

[bwest350x]

Got the 350x out and showed a neighbor kid his 350 warrior really wasnt as fast as he thought.

[Xpress]

Went out of the house early, took a good look at them, then headed off to work to make money to put into them.

[350xx]

Nothing with trikes. :[

[Ol Deuce]

I put a video together it was snowing & not good day to ride


http://www.youtube.com/watch?feature=player_profilepage&v=L3xMdS5pMIY

[Ol Deuce]

My OE fender arrived in good shape today for the 200x Mini 2stroke.......Its looking good............

[Jon Boy]

my buddy came over to help me pull them all out and to get the 70 to the basement to tear into this winter. let the 125 run for about 15mins. put the original brake lever back on the zinger. then took turns running it around the yard. zinger was on it today, best it's ran yet. wish i had the camera out. thing was cheesecake to wheelie today and got seriously sideways shooting around the truck quite a few times shooting mini-roosts. :twisted: :lol:


EDIT:

Don't know what alot of that means..but it sounds fun!!
the zinger was wanting to pop a wheelie with out even trying and i hang off the side to slide it sideways (flat track style) kicking up a dirt roost while going around the front of my parked truck. it usually dogs a bit and catches traction wanting to highside, but it was running good today and keep the tires spinning.

sorry that better? :lol: :beer:

[dougspcs]

thing was cheesecake to wheelie today and got seriously sideways shooting around the truck quite a few times shooting mini-roosts. :twisted: :lol:

Don't know what alot of that means..but it sounds fun!!

[TatTooL23]

had the steering stem bearing and billet steering stem i got from Applied pressed into the bottom triple tree for my TPC build.

[pantera1975]

I looked at my 86 250R that dont have a motor in it. But My 330 is on its way from BDT hope to have it mon or tue. cant wait!!!

[Thorpe]

Looked at all 3 of them, as I packed the rifle into the truck to head to the woods... Pretty sure the 70 flipped me off as I turned my back to it.....

[torque]

your lucky it did not put a shank in your back. you can not trust a 70. lmao

[SteveCZ28]

put fluids in my 85r. put the petcock rebuild kit together, and now have a leak free petcock. checked air pressure in the tires. put the tank on and bolted her down. hoping to take her for a light rip tomorrow. and try to get the new motor broke in

[hillbilly 200x]

mhmm Lets see I picked up an old 82 honda xr 200 that is going to looes its engine to my 200x. Can any one say 1983 honda atc 200x 6speed :twisted:

[SteveCZ28]

rode my 85r today for the first time with the new motor. it runs really good, but insanely rich. i need to get some leaner main jets for it

[kylegrimes]

tore the motor down for a new rod and top end

[TatTooL23]

Got my TPC frame powder coated and started assembly. Got it to a roller. I will be starting a build thread soon

[jays375]

Started getting things ready for playing on the ice.All of this is new to me.

[wisconsinite]

took the honda for a ride down to the river, no ice yet:(. looked at the tri z and wished my yard was big enough to get out of 2nd gear (lousy horses!). shopped ebay for gaskets for the 70.

[bigredridr]

rode my bigred for a good 3 hours figured she hasnt been run in a while. some trails, hills, swamp and then to the local car wash to clean her off in that order lol.

[RapidRick]

R&R fork seals on the #2 AutoX.

Located and purchased Front Hub and Brake caliper for a thumper build.

[Chazz of Blades]

I moved my 200es(until I can get her a new tank), my 200s(she needs a ring job and clutch work), and my Suzi 185(she's the skank of the bunch) out of my shop to a friend's huge storage building to make room. I can now fit a Geo Metro in my shop without having to pull everything out!

[Sneakers]

Today I installed my rear axle as it was bent and I had it straightened, also changing my rear tires.

[RapidRick]

Derusted a 200x tank yesterday and will Kreem today. Rebuilt 200x brake master cylinder for the Nick.

[SteveCZ28]

took pictures of my new tecate for everyone to see. and then rode it for a few, wanting to see what it does in about a inch of snow. lol

[hoosierlogger]

played with my atc 70 that I bought. It bought it as non running. I adjusted the valves, cleaned the carb, checked the timing, and tightened the cam chain. Then I found out that the intake studs had a helicoil in it that was not doing its job. When you try to tighten the nut it pulls the stud out. Gotta fix that.

[buzzy613]

i made a mount for my 2in powermadd block riser for my trike

[Mondexbrute]

I started the 400x up twice yesterday, today just looked at em a few times!

[RapidRick]

New clutch cable bracket fabbed and installed, clutch cable and decomp. cables installed and adjusted on GenII Nick

[350xx]

Rode my atc70 on the road and started to make a small trials course for it :D
Worked on a trx200sx. ugh pain.
admired my 350x :D

[jb2wheels]

Over the last week or so, I finally finished tearing my 350X beater apart and sent the frame off to TPC for gussetting.

While that's out for work, I'm cleaning up the major sub-assemblies. I started with the forks. I took them apart and bead blasted the tripples and the fork lowers. This is my first major use of my bead blaster and it's awesome!

One of the fork tubes is bent so it goes to the shop for tweaking this week.

And, the Loncin 200X got a longer shifter. The shift shaft is in the same location as a Honda 200x engine but the shaft is shorter so a 200x shifter won't clear the stator cover. The Loncin shifter was about 2 inches too short - it was a pain to ride with - I have big feet. I spent about 2 hours looking and shifter pictures on eBay and found a heel & toe shifter from a Chinese quad that looked like it would work. Cut off the heel part and it works fine.

[buzzy613]

Got my cases to match up finnaly! now i got to wait till friday to re assemble it completely

[RapidRick]

The '82 hub, axle, disc, and caliper came in today. Guess all the parts are here to make a Fat Tire Thumper

[dezert250r]

i found some other parts to that caliper Rick ill send them out tomorrow glad to see you got them.

[RapidRick]

Thanks, Hope you get down here to ride soon.

[SteveCZ28]

I robbed the anodized red oil fill plug from my tecate and put it on my 250r.

[SteveCZ28]

cleaned up some extra wiring on my tecate. a previous owner took the kill/ligh switch of and wired in a tether switch in place of it, but left extra wires hanging. so i pulled those out.. did some tweaking to the fenders on my tecate also to get the seat to latch to the frame. and then took the polished gas cap off the tecate and put it on my 85r

[BiggDogg]

Just bought some new brake shoes for the front end of the KLT110.

[SteveCZ28]

did some cleaning/dusting on the tecate. put a green tank cover on it, put a green radiator cover on it also. and rode it all over the place here. its a fun little kie except you go numb due to it shaking you to death. im not sure it has a counter balancer in it
http://i261.photobucket.com/albums/ii44/Stevecz28/photobucket-1746-1324157010999.jpg
http://i261.photobucket.com/albums/ii44/Stevecz28/photobucket-4045-1324157075603.jpg

[atc350xer]

I just went out to the garage and sat on my sx for a few minutes.

[SteveCZ28]

I just went out to the garage and sat on my sx for a few minutes.

Lol I thought I was the only one that did that!

[oldtime3wheeler]

Mounted a headlight onto my wifes 79 atc70.

[RIDE-RED 250r]

Well, my engine is currently out of my R right now. Just sent my cases to ESR for machining and they will be returning with some NEW friends. A 350 cyl kit, trx9 port, ATC5 pipe, silencer, ESR reedblock, race fuel head.

SOooooo, as I set and patiently (HA HA, yeah right!) wait, in between obsessively tracking my package on the Fedex site, I decided to go ahead and strip my stator and clutch covers. I'm going to just polish them up myself. Got the stator cover pretty darn descent today with some Mothers Mag Polish and a Powerball... Duneworthy?... no. But not too shabby. Going to look around for a higher grade polish to see if I can really put a shine on them! I have heard Mothers Billet Polish is a good finishing polish. Anybody have any other recommendations?

[captainweezy]

Changed the oil and filter in my 350x and also rode about 2 hours with my 4 year old.

[RIDE-RED 250r]

Oh! Almost forgot... Wasn't today but...

Yesterday, Ol' Red ('84 BR) and I went down into the woods and took my treestand down and brought it home.... I love that handy little trike!!

[pantera1975]

I went out in the garage looked at my all new 330 motor and said man if you were a chick you would be hot. Wish my back would get better so I can have the energy to work on stuff after I get home from work. BDT did my complete motor and it looks AWESOME all powder coated and just perfect. The looks and quality of it sitting on my tool box exceeded my expectations.

[TatTooL23]

^^^^ that is a beautiful motor.

i worked on my TPC today. got a few more little things done. will start the build thread soon once i get some more content to keep a regular flow of pics.

[pantera1975]

I got a blue Anodized WP cover and filler cap coming too form BDT. I left the cyl natural because it gonna be a trail machine.

[RIDE-RED 250r]

I got a blue Anodized WP cover and filler cap coming too form BDT. I left the cyl natural because it gonna be a trail machine.

I'm leaving mine natural too.... I'm getting the blue head for mine too! Guess I'm a copycat! LOL!

Gonna be black center cases, polished stator and clutch covers, natural cyl, blue head and blue reedblock.... Yeah, it's kind of a hodge-podge, but it looks good in my mind...Guess I'll find out for sure if I like it when I get it all together....

[racer....X]

My oldest son went out to one of the sheds and pulled out all the trikes that were in there.None of them had ran in over a year. He got the 83 big red goin and I got the 86 tri z goin. Kinda fun playin with the old ones that haent been rode in a while.

[RapidRick]

Well actually yesterday. Out to the desert, but couldn't get it started. The fuel left in the tank only after a month on this trike smelled like turpentine. Damn California blended fuel. I'll try again this PM,

[STiForester]

Put a new gasket an O ring on my exhaust and started her up for the first time. She runs. Lots of white smoke but my plug is black and wet.. The smoke tells me lean and the plug tells me wet. So dunno what to do.

[RIDE-RED 250r]

Put a new gasket an O ring on my exhaust and started her up for the first time. She runs. Lots of white smoke but my plug is black and wet.. The smoke tells me lean and the plug tells me wet. So dunno what to do.

Tell-tale sign of burning coolant!

[KgoX]

Well actually yesterday. Out to the desert, but couldn't get it started. The fuel left in the tank only after a month on this trike smelled like turpentine. Damn California blended fuel. I'll try again this PM,

good ole' California...super high gas prices and you can't stock pile it when the gas prices are low because it only last a few weeks...conspiracy! I tells ya'!:shiftyeyes:

[sittinguy]

The the 2 350X's out today just fire them up,, its been a few months :(
They both started, 1 ran good but the older 1 that has sat longer was popping and no idle.

SO, carb off, apart, clean, reinstall, new fuel, check plug, runs great.

Then I proceeded to run over a pile of dog crap :(

dammit!

[racer....X]

pulled out the 185s that quit running over a year ago. My 13 yr old son started changing parts while i was pullin other bikes out and he got it goin. Not sure what the problem was. He changed the coil, cdi box and pickup all at the same time so it was one of them.Hes been riding it all after noon.

[torque]

just stripped my stroker project down to the bare frame. now i have to learn how to powder coat

[RapidRick]

Well didn't get out like I wanted but did put the new Sudco carb on the shelf since it won't fit in the frame. However, I did get a stock carb mounted and a new bracket fabricated so the pull of the push/pull works in the Gen II. The Sudco will go in the Gen I since I'll have more room for the rear tank mount. It was a good day, now to order a new K&N.

[KgoX]

put the new OHV sticker on the fender.

[threewheelin-feelin]

i installed a new head gasket on my 250r as well as a new clutch cable today...i also rode it and my big red for a couple hours today...i then stared at my 350x for about 20 mins wondering how much its going to cost to fix after it developed a mystery knock/tap on the last ride...and i cant tear it down since i have a buddies warrior in pieces in my shed

[racer....X]

Put a new set of points in one of the 70s.It still dosent run perfect but atleast it runs. Have to stop buy the honda shop in the morning to pick up 3 more sets for some of the other 70s.

[Ol Deuce]

Cut my '86 hub down to fit my 10'' rim to it..........It did well

[mtsnieg]

Sadly, I put mt 200x up for sale on Craigslist, after a little grass shredding.

[racer....X]

went and picked up the 70s points I ordered and the cam chain tensioner springs for the 200x's. Now I just gotta get out there and get em all put in.

[110klt]

Put better tires on my 110KLT off the doner bike I bought. Sitting and looking at the new top end in my engine that is on my bench waiting on the other parts to come in so I can get her all together real soon.

Has anyone ever made a hard tail bike into a suspended rear? I would like to make a 110 Tecate.

:TrikesOwn

[RapidRick]

Put the carb back together on the AutoX, took the old seat cover off and getting ready to replace it, Kreemed the tank for the same trike and should be ready to set back up tomorrow. Figured to go with a center single cable pull round slide carb for the Gen I trike.

[STiForester]

sealed my new intake boot and rewired my cdi box and bought a complete gasket kit and axle bearings with seals for $30! win!

[110klt]

set in my new rebuild and hooked up the exhaust. Waiting on a part or two so I can fire her up. But atleast I am working away :)

[RapidRick]

Thumper Mutt needs a new frame, too many cracks, tinking I've got a chrome moly hanging around somewhere :naughty:

[oldsking86]

Stared at our bikes in the basement... im getting that itch for another ride!!

[110klt]

Stared at my Bike waiting on that part I am missing......... Gaaaaaa I want it up and running again.

[racer....X]

Pulled 3 of the 70s in and put thier new points in. Got them all running good. Noticed on the last one that the frame was a little bent so I fixed that. Then decided to make a new steering stop for it. Pulled the forks out so I wouldnt cook the bearings welding it on, then decided the forks needed sanded and painted.Now the whole thing is in a hundred peices. Another project I was not planning on doing. I admit I have a problem.

[KgoX]

Pulled 3 of the 70s in and put thier new points in. Got them all running good. Noticed on the last one that the frame was a little bent so I fixed that. Then decided to make a new steering stop for it. Pulled the forks out so I wouldnt cook the bearings welding it on, then decided the forks needed sanded and painted.Now the whole thing is in a hundred peices. Another project I was not planning on doing. I admit I have a problem.

I think your just a little more motivated then I am.

[Jon Boy]

just took the Zinger out for one more last ride and changed the fluids, double checked all the nuts and bolts, adjusted throttle limiter and filled it with gas and 2smoke oil. taking it to my brother tonight, can't wait to see the look on my nephews face on Christmas day. wish i could be in his shoes. :lol: :beer

[jays375]

Today was a very busy day.Installed new forks on the 350x after replacing seals.Removed the trees and greased up all those little bearings.New front wheel bearings.The worst job was removing the nuts for the exhaust header.I figured since everything was out of my way might as well do it now.Took my time and was in no hurry.With the torch and patience all went well.Should have took a picture of how rusty things were.The motor is coming out for new valve seals and a clean up.

[captainweezy]

Took the front wheel off the 87 BR to mount a dirt devil on it. Also dug up all my 90 110 parts and started reorganizing them. Damn near 20 big boxes full.

[pantera1975]

I looked at my R and asked it why the fmf and psi pipe dont fit on my big bore motor very well.

[JohnR.]

Put the freshly painted exhaust back on the 125M I'm getting ready for my daughter. Of course now that the nice looking exhaust is on, the frame looks oh so nasty and its taking all my self control to not have the thing in a million pieces and start sending parts out for powdercoating. I popped a new battery in it, fiddled with the carb a little and tore some odds and ends off for cleaning. Once the new bearings, brakes, and what not show up it'll get wrapped up and left alone (for now) so she can play on the ice if we get any this year. You can bet your arse that dad will be playing with it too. :)

John

[110klt]

*sigh* still waiting on that part for the carb so I can start-up my new rebuild.... Well and made a killer deal on a new aftermarket exhaust..... Thanks again to that great member.... Other then that staired at my 3 wheeler in hopes of enjoying it soon......

[perrycyn]

Put a nice shiney gold NOS axle in my 250r.

[jays375]

Today yanked the engine out of the 350x for new valve seals,decomp seal and a clean up and paint.I was on pins and needles removing all the rocker box bolts.Doesn't look like the valves were ever adjusted.Plus I noticed the shock settings have never been moved.The yellow paint is still all in line.

[racer....X]

Pulled out a bigred and hooked a trailer to it and used it to drive around and plant some trees.The kids got out a couple 70s and a 110 and rode them around while i was plannting.

[RIDE-RED 250r]

Loaded Ol' Red on the trailer and went to my parents place with the wife and kids for a big family Christmas party. Loaded a couple of pistols and some ammo up on the rack and did some blasting with my brothers and brother-in-law. Then I took my kids and some nieces and nephews for rides till I got a flat... I hate tubed tires...

So, I had to finish giving rides to the kiddos on Dad's Rancher 350....

Merry Christmas everybody!

[Yordo02206]

pulled the 84 200x out looked it over and noticed that it's time to freshin it up..my plans are 86 250r front fender,new rear fender (white for both) performance pipe,13 tooth front sprocket,new chain,new grips

[devilman]

Finally got around to putting my new plastics and decals on the R. Big thanks to 69-ss-396 for hooking me up with the decals for the R and X! Next is trying to get the black paint off the Blue FMF. Last owner flat blacked the motor and pipe:(

[fire1]

Finally got around to putting my new plastics and decals on the R. Be thanks to 69-ss-396 for hooking me up with the decals for the R and X! Next is trying to get the black paint off the Blue FMF. Last owner flat blacked the motor and pipe:(Looking good

[ringdingrider]

sent my frame and other parts from my 85 250R off for blasting and paint. once its back its time for reassembly. needs to be up n runnin before valentines weekend

[pantera1975]

You still planning on the ride then? I never paid attention but if theres no so and the trails are closed for sleds can a atv be used?

[oldtime3wheeler]

Pulled the big red out and used a drag harrow I just got to flatten out the horses pasture. Looked at the rest of the trikes and then locked everything up.

[racer....X]

Helped my son work on his 70 for a while and almost have the frame ready for paint.

[110klt]

got my new rebuild to start. But not happy that I still have troubles, Guessing in the carb...... guess it's back to the drawing board.

[bucko]

Rode around for a few minutes and freezing my arse off...Once my tank shrouds get here I am done with it apart from switching my rear fender to a maier one I bought a few weeks ago.

138471

[Sneakers]

Picked up some two stroke oil, 20 litre gas can, tranny oil (10 40) and fork oil, time to replace all the fluids on my 81 250R, then planning on fixing my rusted to nothing seat pan problem :)

[racer....X]

Went and picked up another 110 today that I found on craigslist. Got it for $30.00. Missing the tank, carb and recoil.Finished painting the frontend parts on the 70 and got it back on.

[hoosierlogger]

Re-assembled my 85 200x engine and got it back in the frame. I was planning on getting it running tomorrow, but my kid just got sick with the flu. Might be a while now.

[atc350xer]

Put the new seat cover on the sx... looks sexy.

[110klt]

Changed the carb on my KLT110 and the new engine rebuild runs like a top, very happy. Next is new brakes, repaint rear fenders and tank, and replace seat cover. Oh and make a suspention rear :cool:

[bucko]

138650138651

Changed swingarm today.....Thinking about selling one of my 86's.May be moving and cant take them all...
This is one I raced with a group of 8 friends today who all run 200x's or 350x's.Came in 3rd which isn't bad considering I am a noob. :P

[sp8twn]

pop riveted my front fender back together t'il i get my new one in the mail!!!!LOL!!!138654:rolleyes:

[Yordo02206]

i mounted the radiators on my tri z,sand blasted and painted the foot pegs and gas tank pan & mount,and my triple tree with forks came in the mail today..

[SteveCZ28]

got the tecate out. found a trail thru some fields. alot of straightaways. and really gave the tecate all she had. i weigh 280lbs, and the power this thing makes is oh so sweet. it literally pulls power wheelies thru 4th gear when it hits the power band. ive never had a bike do this before.. im loving it. also aired up the tires on my 250r to move it around in my garage to get my banshee out of the corner, so i can finish the engine install on it, and hopefully get her to fire up on a complete bottom up rebuild

[JohnR.]

I took the rear axle/brakes/carrier and the front hub and brakes off of the 125M yesterday and brought them to work try to do some of the stuff they needed today since we have the presses and stuff to make the bearings easy to do. Luckily it was a slow day so I was able to do all of it. Front and rear brakes, bearings, seals, and cleaned up a bunch of little bits along the way. Gonna try to reasseble it Saturday morning and take it for a little ride. I think that when my daughter isn't riding it I just may use it as a booze cruiser out on the lake. Electric start and not a lot of power makes it ideal.

John

[110klt]

Project KLT........... Waiting on new seat cover in the mail, and tank and fenders from the paint booth. A lot of walking circles around it and thinking :)

[devilman]

Got the black paint off of the pipe and side cover. Anybody know anything about this pipe? I was told by a couple dudes that it is a rare one. I contacted FMF, but without a part number they can't tell me or they don't know anything. I think the motor will look better black, just not with the flat black the last owner did.

[SteveCZ28]

put my spare carb together for my 85r. got it to finally idle on its own, which im guessing is because of this carb. took the bike out for a few runs, and it is running really lean. went from a 142 main to a 145, but it is still to lean. so i have no choice but to wait till the jets i ordered earlier this week to show up. and hopefully get my airbox that i bought here also, and install the airbox, richen the mains up a few more sizes and hopefully get this r to scream its ass off alot harder than my tecate right now. haha

also managed to get the r all muddy thanks to the rain we got today and the closest gravel road i could try riding this thing on

[SteveCZ28]

Got the black paint off of the pipe and side cover. Anybody know anything about this pipe? I was told by a couple dudes that it is a rare one. I contacted FMF, but without a part number they can't tell me or they don't know anything. I think the motor will look better black, just not with the flat black the last owner did.

thats a pretty cool looking r you got there sir

[RapidRick]

Well, got the Gen II out this afternoon and made a list of stuff I've got to get, change, modify, or buy before the Imperial Invasion comes around. Have to be ready this year.

It's a short list though as long as I get two things done each day, I should make it in time. :wondering

[69-ss-396]

Got the black paint off of the pipe and side cover. Anybody know anything about this pipe? I was told by a couple dudes that it is a rare one. I contacted FMF, but without a part number they can't tell me or they don't know anything. I think the motor will look better black, just not with the flat black the last owner did.

Looking good bud!!

[Thorpe]

I rang in the new year, rebuilding my SX carb! Happy 2012!

[Frankencelery]

Wow Thorpe, you really know how to party! :D

[Jon Boy]

threw the 70 back together the other day, so i don't have parts everywhere to get lost.
then today i was looking at the pegs, the old rubbers are toast. got to thinking what i might have around handy to try out. came across some old junk BMX pegs and figured why not. :lol:
don't look bad, but i think i'll switch to my J-pegs. they're a slightly smaller Dia. and way lighter (about half the weight). :lol:
138845

[ATCcountryboy]

Took my big red to the local dirt pit for a few hours. Then I put it in the garage and looked at it for a few minutes.

[captainweezy]

Mounted a dirt devil on the front of my big red. looks good. Going to change out the front brake line with a new stainless one i bought for the 350x
.

[RapidRick]

Redesigned seat latch on Gen II Nick so it's more safe and works with a rear light bracket. Building bracket comes this week.

[3boyswinter]

got them both out, rode them awhile, pi**ed off the neighbors, took a picture and put them back

138875

[110klt]

Put on new triple tree, cleaned and packed bearings. Cut off 185KLT light brackets tabs and getting ready to weld on the stock 110KLT. Hoping to have something worth taking some pictures of here soon...........

[Thorpe]

Wow Thorpe, you really know how to party! :D

I was on call for work, so no party for me... Figured I might as well be productive!

[mtsnieg]

138927138928138929138930

[350XJEDI]

:twisted:Went riding for most of the day very muddy trails ,,then got my phone wet:rolleyes: ,that was actually yesterday ;),today gotta clean the trikes and sons quad ,, super muddy, graet way to start the year:D , plus gotta score a new phone,oh well that why i get the cheapy phones .jones creek is closed but the trails on the north fork are awesome !!:beer

[Micahdogg]

Picked up the '79 ATC110 from Capt Weezy and swapped rims and tires from a parts bike, sprayed some gold krylon, trimmed up the busted rear fenders, and practiced my awesome wheelie skills (not).

http://i191.photobucket.com/albums/z84/Micahdogg/atc110b.jpg

[Jon Boy]

hey Micah is that front fender on backwards or is it just me? the 110 is really looking decent though IMO. :beer

[98600xc]

me and a few buddies took a ride down one of the local rivers to the bar!! I only broke through the ice like 6 times! ha but it was a blast!

[Micahdogg]

It does look a little weird, but I think it's on correctly. I don't have any of the mudflaps so maybe that is why it looks weird.

[69-ss-396]

Took a short video of my ESR 310 powered 86 250r.. Getting ready to list the motor on ebay.. Moving on to bigger and better things.

http://www.youtube.com/watch?v=F8s8dulVJJM