PDA

View Full Version : Yz 250 piston specs vs tri-z250



NEWDUCK
11-06-2008, 04:40 PM
Since I have torn down my tri-z I called wiseco and asked them where the piston came from because the tri-z piston numbers they had didnt match my numbers. The piston is for a yz 250 83-87. I asked them what the diffrence was and the wrist pin sits .015 higher and the top of the dome is .055 higher than a tri-z piston. So just incase any body was wondering the diffrence between the two if any there you go.

DeePa
11-06-2008, 04:49 PM
i run a prox yz piston in my z without any issues

ATC-Eric
11-06-2008, 06:06 PM
The Wiseco pro-lite is lighter then the Pro-X ( by a decent amount). Cant remember exactly how much, but Ive measured it before................

03 ORANGE SHEE
11-07-2008, 05:01 PM
The Wiseco pro-lite is lighter then the Pro-X ( by a decent amount). Cant remember exactly how much, but Ive measured it before................

power robbing heavy!

Blown 331
11-07-2008, 05:06 PM
Good info, I need a piston for my TRI-Z.