Tri-Z throttle cable options.....

[ATC-Eric]

I cant remember what cable I used, weither it was a 250r cable, or an 86 Z cable. Mines tore up and I need a new one.


Im running a 39pwk, and a moose racing thumb throttle.


Anybody want to shine some light on this for me?


Thanks.

[honda250sx]

83 250R I believe.

[ATC-Eric]

Jeff your no fun! I was thinkin it was a water pumper cable. But that does help, Im pretty sure those cables are the same as the 85-86, just longer.

[tri-Z ripper]

sure its a 250R cable but not sure what year i know deepa is using a honda thumb throttle and not sure on which cable though!!

[DeePa]

85 250r cable, pull that brass piece out of the cap on the pwk, screw the cable into it, good to go

[ATC-Eric]

Thanks for the replys guys, Im orderin my cable.

[honda250sx]

Arc cable mike? Thanks bro! Raffa told me 83

[ATC-Eric]

Is there a difference between the 85, and 86 cables (250r)? I just got an 86 cable in the mail, and it doesent have the threaded end for the carb that I was anticipating.


I suppose my next move is the 83, but it would be nice if someone could be sure. This trial and error is no fun on my wallet.

[honda250sx]

85!!!!!!

Let me go take some pictures little buddy. You have my damn number!

[ATC-Eric]

No need for pics, I think it was just a mistake when ordering. I know the carbs on the 85-86 R's are a little different, just didnt think that different.

[honda250sx]

http://i71.photobucket.com/albums/i151/brauerpower/DSCN3560.jpg

http://i71.photobucket.com/albums/i151/brauerpower/DSCN3562.jpg

[honda250sx]

Cables are complete different on the ends. Must order 85 grasshoppa. Sprocky taught you better!!!

[ATC-Eric]

Its all Sprocks fault! I say 85, he bring 86!


Overnite charges here we come!lmao


Anyways, thank you for the speedy response, and pics.

Now back to the garage to get the rest of the bike done. Just got the motor in, did some super secret portwork to it that should REALLY wake er up :naughty:


Oh and Ive run the clutchbasket since TF with some SEVERE beating, NO loss of anodizing from the clutch disks. Gonna do a writeup with the pics we took, the clutch basket has performed great! And thats with a LOAD of high RPM clutch Drops with my wheelie bar, no wear at all.

Anyways........

[honda250sx]

What are you pullin' that BIG PWK with Eric? TRX250R thumber???

http://i71.photobucket.com/albums/i151/brauerpower/DSCN3571.jpg

IT PULLS THE SLIDE ALL THE WAY TO THE TOP :)
http://i71.photobucket.com/albums/i151/brauerpower/DSCN3572.jpg

[Tri-Z Pilot]

Whre did that sweet float bowl come from? $? I'm lookin for one for my 38 PWK

[honda250sx]

RDZ racing... They make them for the Shee's. These are done so nicely. I heard rumor that Sprock would be making these for PWK's. He has done them for the lectrons as well. These are high flow float bowls. So when you stab she doesn't starve.

[Tri-Z Pilot]

Cool deal, I will wait to see if Cory is gonna do some. I would rather patronize someone from the site, and Cory does awesome work from what I have seen and heard. Any idea if the bowls on the 38's and 39's are the same?

[ATC-Eric]

Hey Pilot, Coreys got some bowls in his goodie room where Im takin pics of Ronnies Bling as we speak.

Want a pic???





Come over to www.planettrike.com . Im doing a full inventory of the parts that Ronnie sent Corey, and trust me, its a freakin load! Pics included. Let me know if you want a pic of the float bowls he has made.