will this flywheel work on my 84 tecate?

[2quicktecate]

http://cgi.ebay.com/ebaymotors/_Motorcycle-Parts-Accessories__MAGNETO-ROTOR-FLYWHEEL-WEIGHT-KAWASAKI-KX250-KX-250_W0QQitemZ170296481934QQadiZ2863QQadnZMotorcycl eQ20PartsQ20Q26Q20AccessoriesQQcmdZViewItemQQptZMo torcycles_Parts_Accessories?hash=item170296481934&_trksid=p4506.c0.m245&_trkparms=72%3A543%7C65%3A12%7C39%3A1%7C240%3A1318

[2quicktecate]

anyone know. i'm pretty sure it will since a new ricky is for an 84-88. that one in the link is for 86-88. it will take the kx puller to remove though. i would like to have someone that knows if it would work tell me before i purchase it.

[fabiodriven]

I can't tell you for sure, but I don't think it will.

[2quicktecate]

ok, well i guess i'll keep looking. or hopefully nd4speed will dig through his junk and find me one

[boosted96cobra]

Do you want one to re epoxy or what? I have several stockers, the one I took off my running motor is all there, but the magnets have some wiggle. I have wondered if you could drill a couple holes and then epoxy the bleep out of it then maybe rivet or screw them in.

I started the motor to make sure it ran then pulled off the fly and waited for the ricky stator to show up. Seen a few broken cases from those stupid stock flywheels.

[nd4speed]

That KX250 flywheel smaller than Tecate and the stock Tecate stator coils are larger.
So from my experience with both ignitions this is not a possibility.

The general advice around here is- if you switch to KX ignitions parts you need the complete set.

[nd4speed]

One magnet came off mine. It is not good.

[fabiodriven]

I know you don't have the money, but the Ricky flywheel is by far your best bet. Any stocker is just gonna be a ticking time-bomb. I forgot, I've got one out in the shed that looks like somebody re-glued the magnets. It's still on the motor so I don't know how butched it is. If you really want I can take it off and see how bad it is, but I'd just save up for the Ricky Stator one if I were you.

[nd4speed]

I agree. Better safe than sorry.

[Blown 331]

Yep, I did the Ricky flywheel as well. Really nice piece.

[2quicktecate]

mine must have been new old stock. it was really clean. the only reson the mag failed is because the stator bolt backed out...

[2quicktecate]

hey fabio, how much for the one you have. since it's all there i can use some panel bond to reinforce it. that panel bond is very strong, we been restoring plastic trike fenders with it lately, just not cheap though

[2quicktecate]

who's got a good used flywheel? and what do you guys want for the broken ones. i can try to repair them...

[nd4speed]

Oh I thought I mentioned the broken one is basically free. You cover shipping and Paypal fee.

Let me calculate.......

Parcel post $9
Priority $12
Paypal $1

[fabiodriven]

I don't want anything but shipping for mine. First I gotta pull it off the motor a see if all the magnets are there. It might be trashed...