200x swing arm bearings

[robertmitch85]

They wont come out, i have tried beating them with a sledge hammer and they wont budge????? any advice

[robertmitch85]

and i dont know why this posted twice??

[big schott]

You need heat and a press. If you don't have a press us a bolt a couple washers of the right size and a nut. This never seises to amaze me how something so simple works so good.

[Fordfan7379]

Not to steal the thread... but anyone have an idea where to get new bearings/ bushings? I had to cut my bolt and need new ones, have a bolt!
thanks tim

[big schott]

Got mine off Ebay. May not be the best but, the price was right and shipping was fast.

[robertmitch85]

yea i got mine off ebay too, but i dont understand the bolt/washer puller set up, i could see how that would work to get them in, but out?????

[Fordfan7379]

Front (swingarm) bushings/ bearings off Ebay?? I bought rear bearings but can't seem to find the front ones for the swing arm!

[big schott]

i could see how that would work to get them in, but out?????

Basicly, you need to pull the head through pulling the bearing out. Onece you get the bearing to the edge you will need to use a bushing or socket to pull the old bearing into.