The new 85 R I Picked up/450r pegs/Family pics

[Kintore]

Hey guys, Just picked this up from Jim aka Xsystem

Its got a RB ported motor
FMF pipe and can
CF shrouds
New plastics on the back
Some OLD school Dean Sundahl bend answer bars

Plans- Swap the progressive front end from my race bike to it when I replace with inverts on my racer
Add wheel spacers
Wet sand the tank and buy new front fender
6 pack rack thanks Chris!
Custom seat cover from the highly sought after moshs
Ride it till shes dead!

Pics-
http://i3.photobucket.com/albums/y92/JoshBall/P2220054.jpg
http://i3.photobucket.com/albums/y92/JoshBall/P2220057.jpg
http://i3.photobucket.com/albums/y92/JoshBall/P2220051.jpg
http://i3.photobucket.com/albums/y92/JoshBall/P2220058.jpg


Now for the 450r pegs. I bought these off ebay (thanks Rick and Dawn!)

All I did was take a stock set of pegs I had layin around and take the peg off. Use the hack saw and cut off the remaining mounting plate. Take the grinder and clean it all up then weld the 450r pegs to it. There is a little trimmin on the 450r pegs to allow enough surface to weld to.
I am now within a 1/4 inch of the stock pegs and they feel MUCH better!

http://i3.photobucket.com/albums/y92/JoshBall/P2220059.jpg

And lastly, heres some pics of my race trike and the lil gaffer of a 70

Quick update on the racer-
Inverts and elka steering stab coming SOON along with fast flexx bars

What its got
265 Duncan PV motor
39 mil A/S
+4 LSR axle
Elka elite shock
-1 Houser swinger
Rare Yellow Low pro fenders
Custom seat

http://i3.photobucket.com/albums/y92/JoshBall/P2220061.jpg
http://i3.photobucket.com/albums/y92/JoshBall/P2220067.jpg
http://i3.photobucket.com/albums/y92/JoshBall/P2220062.jpg

[2quicktecate]

i'm diggin the yellow r

[MyMistress86R]

Soooo...my tech tips on how to build those pegs finally came in handy huh, little bacon? lol

[Preddy05]

all three look good! And the 450 pegs look good.

[atctim]

Nice new bike Josh. Will the inverts be going on the banana before of after this coming weekend??

[Kintore]

Thanks guys

Probably after this weekend, Hall is still working on him.

The yellow bike is tits right now, i love the way it handles!

[Mrs.Mosh]

Good find Josh!

Gonna make that a trail rider?

[chris200x]

--------------------------------------------------------------------------------

Hey guys, Just picked this up from Jim aka Xsystem

Its got a RB ported motor
FMF pipe and can
CF shrouds
New plastics on the back
Some OLD school Dean Sundahl bend answer bars

Plans- Swap the progressive front end from my race bike to it when I replace with inverts on my racer
Add wheel spacers
Wet sand the tank and buy new front fender
6 pack rack thanks Chris!
Custom seat cover from the highly sought after moshs
Ride it till shes dead!

I just seen this (where I hilighted in bold)... I thought you said you wanted the rack for a 200x? at least that's what I read in one of your PM's.

I'm not 100% sure the 350x will fit the liquid R's. I do know from past experiences a 200x grabber will fit the 350x and vice versa.

I also know the air cooled R (83' 84') grab bars with fit any year 200x. but I never had a waterpumper to swap the parts to see if they bolt up from a 350x.

DO you still want it? I can easily send the money order back no problems. Unless one of these guys know for sure that it will fit.

let me know bro!

[Yamada]

Are the Pro-taper bar on the racer 400EX bend?

[Kintore]

Yep 400ex bend

Moshes ill be callin you!

And chris, sorry that was my bad. That one you got is going on the 200x I have. Just a mind fart im buyin my own for the 2 fiddy!

No worries!

[dizasterzrfun69]

that 70 is sick josh ;) Im gonna dig deeper into my "70 project" tomorrow, i gotta get it done for trikefest. How many R's do you have now? If jim had that one then im sure its quick. good score.

[Kintore]

Hey sorry i took so long to reply there Kevin,

Im up to 2 250rs, one the 265 Racer and the other "trailer"
And I got a auto X coming from atctim

Ill be set for some SERIOUS haspin trail ridin this year!