help with 350x!!!

[mean350]

hey . i havent been on i long time . just got the computer up lol. well anyways i got an 85350x that keeps throming chains every time i start to get on it. all m bearings are tight as can be. wa would cause this. thankyou

[threewheelin-feelin]

have you tried tighting it? also what condition is the sprockets in? maybe the sprokets arent lined up right

[i58829]

I'd say the teeth on the sprockets are rounded or pulled which would angle them forward. If thats not the case then check the alignment it may be trying to twist as it goes around. If it were mine i'd buy all new chain and sprockets, the front one can mount either way on the motor and most of them are offset a little its possible it was put on backwards and that would change the offset about 1/8 inch or so...

[mean350]

ok the sprckets and chain are both new too. ill try flippin the front sprocket and see if that works. it also seems like hte front sprocket has play in it

[RapidRick]

front sprockets usually do have some play on the shaft. Sounds like a loose chain.

[Erics350x]

Look at it from the rear and see if the sprocket are inline. It could be number of things. I'd start by double checking the swinger and axle bearings. It could also be a loose or too tight chain, broken frame, ect.