What brand clutches?

[rebel33382]

Going to order a set of clutches (manual) for my 200ES, what are the bullet proof ones. I do mostly mud riding, and with the bear claws, Its pretty well abused!

[Dirtcrasher]

OEM or BARNETT PERIOD!!!!!!!!!!!!!!

[rebel33382]

no versah?

[oscarmayer]

i personally like versah. i use them and their heavyduty springs. Works good.

[Saul]

i personally like versah. i use them and their heavyduty springs. Works good.

Me too. I dunno how long they hold up but they grab like a mofo so far.

[The Goat]

I posted up a link the other day for barnett springs...they are cheaper than the vesrah and last longer.

as for long lasting...you can't beat honda fibers.

oem fibers...barnett springs...best combo.

[ATC-Eric]

OEM Ftw....

[oscarmayer]

yea i know oem will last longer, but it's not hard to do a clutch job. if your up on your maintenance as you should ne the versah will last ya quite a few years before needing change out. at a total of $45 shipepd for the clutches and springs, it's not a biggie to me. honda oems are like $95 for the clutch set alone shipped then the springs.

[Dirtcrasher]

^ Well...... MANY of us are still working on the stock 20YO and older OEM clutches.

Aside from those, I run only Barnett or OEM in my motors. I had a new Vesrah clutch in one machine and in the summer when it was hot, it slipped like crazy.... Adjustment did nothing.....

Maybe it isn't a hard repair, but if 30$ more buys me 20 years, is it worth fking around with "MAYBE??"

Not to me..... Use what lasts and WORKS!! OEM RULES!!