Rocky Mountain ATV brake rotor closeouts...

[Micahdogg]

Not sure if this is the right forum for this, but I just noticed front brake rotors have been discounted from $59.00 suggested price to $19.00. I got an email from them with the discounted price at this link:

http://www.rockymountainatvmc.com/productDetail.do?navType=type&webTypeId=30&navTitle=Brakes&webCatId=15&prodFamilyId=3135&stockId=46055&vehicleId=1908#vehicleSelect

For some reason, when I go through their website and enter 1986 ATC250R machine information, it still shows $59.00. Anyway, maybe someone could use this.

EDIT - REMEMBER YOUR DISCOUNTS!!!!!!!!!!! If you are purchasing $100 ($10 off), $150 ($20 off), $300 ($50 off) or $500 ($100 off). Good through April 31, 2009.
http://www.rockymountainatv.com/specialoffer.do

[rdlsz24]

Sweet first gen 200x ones went from 80 to 20. Too bad I don't need one right now.

Rob

[Micahdogg]

Oh yeah, guess I didn't notice it applies to 200X, 250R and 350X!

[WIkid500]

Is the stainless rotor that much better? Would it be worth the 40 bux to upgrade to them?

[Dirtcrasher]

Yes, without rust you don't wear the pads as fast. Rust is very abrasive....

[oscarmayer]

hrmm time to think about upgrading my X

[Dirtcrasher]

Act quick, there's 4 less now......

[nd4speed]

I bought a generic Titax stainless rear from them for a LT250R for like $30 shipped on closeout. It never rusted and I sold it for $38 after I used it. Not sure it this helps but...............

[Bigbore]

Act quick, there's 4 less now......

I just bought 8 and they said they have 56 more. For $20 each.... you can't go wrong!

[andnuaa]

I bought one a couple months ago for my 350 project and it looks very nice

http://i248.photobucket.com/albums/gg172/andrewpics2/350072.jpg?t=1238712843

[Dirtcrasher]

I just bought 8 and they said they have 56 more. For $20 each.... you can't go wrong!


Funny story, I called DK by mistake and they couldn't find the part number and she asked "are you sure thats the part number?" I told her I'd call her back :lol:

But anyhow, I called RMATV and she said they had 14 left :wondering Regardless, you guys should grab them up FAST! How can ya beat it for 20$? New, no wear and no rust is SHWEEEEEET!!

ANDNUAA - That looks great! It was the same part number for the 200X, 250R and the 350X. I hope you didn't have to pay full price!!

[seadoo650]

Just got a few myself. Along with a crap ton of other stuff. Did you see the fuel line for .99 for three feet?

[andnuaa]

Funny story, I called DK by mistake and they couldn't find the part number and she asked "are you sure thats the part number?" I told her I'd call her back :lol:

But anyhow, I called RMATV and she said they had 14 left :wondering Regardless, you guys should grab them up FAST! How can ya beat it for 20$? New, no wear and no rust is SHWEEEEEET!!

ANDNUAA - That looks great! It was the same part number for the 200X, 250R and the 350X. I hope you didn't have to pay full price!!

No I only paid $20 for it and they combined the shipping with the rims I bought

[blue27]

I bought one and a "used ATC70 douglas rim" in the scratch and dent section

thanks for the heads up

[250rulzes]

Any chance these fit the 86 T3's? Can someone measure their hub from bolt to bolt?

[aldochina]

just ordered 2, along with some bearings, brake pads, and fork seals, came to 99.95 Free shipping:beer

[Micahdogg]

Had you ordered $.05 more worth of parts you would have gotten a $10 discount too!!!

EDIT - Which just to remind everyone.....here are the discounts if you are purchasing $100 ($10 off), $150 ($20 off), $300 ($50 off) or $500 ($100 off). Good through April 31, 2009.
http://www.rockymountainatv.com/specialoffer.do

[aldochina]

couldnt you have just kept that to yourself!!:rolleyes: lol, oh well, still a good deal

[WIkid500]

Just ordered my 2 for the 85 200x, and some uni Air box vents. Another 60 bones thrown at the 200x. When this thing is done it will be worth more that it was new. lol I like it!

[kbreese]

Only for front rotors?

[FastZ28]

I ordered 2 and EBC pads along with new Douglas 10x8 red labels for my new 18x11x10 Fast Trekkers I got off ebay :w00t:

[200x Basket]

well they have two less for the 250r and 200x.

thanks

[WIkid500]

Only for front rotors?

Correct me if I'm wrong but aren't they the same???

[kbreese]

Well they specify a different set for the rear which are $59.99....not sure if they are the same or not but if they are I don't know why the specify separate "front" and "rear" discs with different prices...

[Dirtcrasher]

Closer bolt pattern on the rear.....

Don't worry, those will go on sale next year and we'll snag em up :D

[WIkid500]

For those who were wondering the 85 200x has the same rotors front and back. I ordered 2 fronts on a whim thinking they were the same. Got them today and perfect they both fit. I have stainless rotors front and rear! Tits!

[oscarmayer]

why stainless rotors? won't they wear faster than the carbon steel ones?

[Yamada]

why stainless rotors? won't they wear faster than the carbon steel ones?


Yes, without rust you don't wear the pads as fast. Rust is very abrasive....

:cool: It make sense to me.

[beets442]

Nice find Micahdogg. Thanxs!...Just ordered a new front rotor for my 350X, since I'm rebuilding the front end. Stainless is harder than carbon steel and dissapates heat better, but with all those holes in the rotor, I don't think it matters. Pads are cheap.Beets

[oscarmayer]

i'm not talking about the pads. i'm talking about the rotor themselves. the SS is softer than the carboin hardened steel rotors that the oem uses. unless they use a special hardened ss, then it's cool and grab them!

[oscarmayer]

i'm actually calling to ask if they know cause if they are a quality hardneded ss then i'm getting a set.

[beets442]

There are three basic groups of stainless steel:

Austenitic - These chromium-nickel and chromium-nickel-manganese stainless steels are nonmagnetic.
Martensitic - Alloys of iron, carbon, and chromium that are magnetic in nature.
Ferritic - Magnetic stainless steels with more than 18 percent chromium.
Stainless steel is a classification of special alloy steel. As the name implies, stainless steel is extremely resistant to corrosion." It costs more than carbon steel and is harder to cut and machine." This where I got my info. FWIW I know steel. I weld and cut all types. Let me know what you find. I learn something new all the time. Beets
http://www.actionstainless.com/metals/stainlesssteel.htm

[i58829]

I just got a handful of these today, i went in with my cousin and a buddy and spent 500.00 so i saved a hundred bucks as well. But anyway between these rotors and my Irazr's i'm pumped. The rotors are very nice, they are also Blanchard ground which in my mind makes it a far superior product and a great upgrade over the ground down worn out stock rotors...

[Dirtcrasher]

I bought more today, They also fit an 84 250R rear rotor and thats what I run on the 86 200X.

They are magnetic if anyone was interested....

[88 Turbo Coupe]

Since they are magnetic they will rust, some what.