In need of 1984 honda 70 repair tips.

[sthhll]

First of all Thank You Crazy for your help. I just picked up my points and a condenser. Is there anything I should look out for before tearing into it. I don't have a manual so going in blind. Not real sure on point settings? Thanks to all for any advice on this....:wondering :wondering

[Macs]

Here is where you can download the manual.


Oscarmeyer, thanks for making these manuals available.

[sthhll]

Here is where you can download the manual.


Oscarmeyer, thanks for making these manuals available.

Thank you, the link is not showing up. Can you please try again?

[CRAZY70MAN]

Do you have a flywheel puller? If not remove nut on crank and us RUBBER mallet to gently tap all around flywheel while you pull out on it, should work. Pay attention to where your wire sets on the points and replace them the same. Remove spark plug, and when new points are in, rotate flywheel till the F mark on the flywheel aligns with the notch on case cover. Watch the points, they shuol just start to open and I mean JUST when the 2 marks align, tighten screw. Good luck. Let me know if ya need any more help. p.s Try points first as condensor you will need a solder gun to install.

[Macs]

http://www.oscarmayer.net/atc/manuals/


I swear i am losing my mind

[sthhll]

Thank You Barry_Man and Crazy70!!! I am hoping to be able to work on this tonight. I NEED to get this thing back on the dirt. It is the BEST for riding with my 3 year old on his 50. I have been checking in local classifieds for more of the 3 wheeled monsters. Need to get more of em. This website really makes you fall in love with them..:beer

[CRAZY70MAN]

Sound like you are hookedshens shens Hope the site helps ya out. Let us kow how it goes. :p