PDA

View Full Version : Atc 200m



Tatted_Angel
04-06-2009, 10:01 PM
Well first off please forgive me because I just joined this site and I am not sure how to do things on here yet. The reason that I am on here is because I just recently got a ATC200M Honda 3 wheeler. I finally got it to run but it will not idle, the only way to keep it running is to give it gas. When I do have it running it has a bad mis to it, and it will run alright for about 5 minutes and then it seems to lose all power. Can anyone help me?

atctim
04-06-2009, 11:35 PM
Have you had the carb out of it yet? Sounds like it maybe dirty - and needs the idle adjusted.

By the way - Welcome aboard!

Tatted_Angel
04-07-2009, 10:17 PM
Yeah we have had the carb off twice, it may still be dirty though. We completely cleaned the carb except for the screw that controls the fuel. Any other suggestions.

oscarmayer
04-07-2009, 10:52 PM
you shouyld consider a complete carb rebuild kit off ebay. it is about $16-$20 shipped and then add in a couple of cans of carb cleaner and roll of blue paper towels and your set.

rdlsz24
04-08-2009, 12:28 PM
Make sure you can see daylight through the jets. When it will only run by giving it gas it seems like it's usually the pilot jet is clogged.

Rob

Tatted_Angel
04-10-2009, 09:29 AM
Thanks to everyone that has helped me with my idoling issues.