Wheel Spacers

[zppeacock]

Im looking to get a set of wheel spacers for my 82 185s. Am I correct that the wheels are 4/130? Ive looked on durablues site and they have them for the 185s but its only in a 5" set. Im looking for something a little smaller then a 5".

[harryredtrike]

if it says 5in.that means 2.5 per side,thats what i have look at pic and see if they are what you want.

[harryredtrike]

these are the spacers i put on.sorry for the double post i dont know how to edit in more pics.

[zppeacock]

Thanks, Do you know if there is any other companys that make spacers for the 185? The only place that I found was durablue

[harryredtrike]

Thanks, Do you know if there is any other companys that make spacers for the 185? The only place that I found was durablue

i found mine on ebay,but there are several different makers.

[zppeacock]

i found mine on ebay,but there are several different makers.

I found some on ebay but I ran into an Issue. One says that 4-115 is the pattern and others say 4-130. Do you know what pattern they are?

http://cgi.ebay.com/ebaymotors/WHEEL-SPACERS-by-DURA-BLUE-HONDA-SUZUKI-REAR-2-1-2_W0QQitemZ380073794471QQcmdZViewItemQQptZMotors_A TV_Parts_Accessories?hash=item587e29dba7&_trksid=p4506.m20.l1116



http://cgi.ebay.com/ebaymotors/NEW-atc-185-200s-2-1-2-rear-wheel-spacers_W0QQitemZ310059159470QQcmdZViewItemQQptZMo tors_ATV_Parts_Accessories?hash=item4830f74fae&_trksid=p4506.c0.m245&_trkparms=65%3A15|39%3A1|240%3A1318

[MonroeMike]

A stock 82 185s = 4/130

http://www.mud-throwers.com/atv_wheel_chart

[zppeacock]

Thanks, Anyone else got any input?

[greenhuman]

Use the 1 1/2" per side individual bolt type spacers off Ebay. Sold thousands of them with no issues or failures.

[zppeacock]

Do you got a link?

[86trizinger]

I have 2 sets of the individual bolt style spacers.. I have to see if they fit my ATC.. They fit my 300ex and my sons eton perfectly.

[zppeacock]

These?

http://cgi.ebay.com/ebaymotors/ATV-Wheel-Spacers-Spacer-Honda-Yamaha-Kawasaki-Suzuki_W0QQitemZ180320731727QQcmdZViewItemQQptZMot ors_ATV_Parts_Accessories?hash=item29fbf4024f&_trksid=p4506.c0.m245&_trkparms=65%3A15|39%3A1|240%3A1308

[86trizinger]

They are similar to the ones I have.. I think mine are 4" spacers and have a 1" nut on them to tighten up. I haven't had a problem with mine as of yet. My son has jumped his ATV over 4 feet in the air over 100 times and haven't broken his yet. They have been on my 300ex for 6 months now and no issues as well.

I am not sure of the quality of that brand though.. but that is the style I think he was talking about.

[zppeacock]

Thanks

Now the issue that I'm having is that my studs are 8mm not the 10mm that are needed for either type of spacer. Has anyone taken the old studs out and used high grade bolts? I assume that will need to drill out the hubs and rims for the larger 10mm bolts

[zppeacock]

Well, $20 in hardware later I have larger studs(bolts). Drilled my rims and hubs. Just need to order the spacers and get my exhaust.

[zppeacock]

http://i107.photobucket.com/albums/m304/zppeacock/82%20Honda%20185s/DSC00140.jpg

[zppeacock]

Well all is good. I installed the new upgraded bolts and the wheel spacers that I got off of ebay. Got my bassani exhaust installed and rode it all Last Weekend with no issues, the Exhaust sounds sick!

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=180320731727&sspagename=STRK%3AMEWNX%3AIT&viewitem=

[harryredtrike]

i had to drill my hubs and rims too,no problems so far.drilled about a 1/32 out really a shave.

[zppeacock]

Well, today was a good day. I was going off a jump, hit it a little crooked, trike flipped and landed on my calf then rolled upside down.

My calf is killing me now!

Trike is A-ok it will still purring while it was upside down and never died. No damage to the trike, and the ebay spacers held up fine.

[outtaline]

good to hear they held up and your ok cause I just ordered a set on Egay cause mowers are such a blast on a hard tail best part is I have 86 200x hubs on mine to so I got another couple inches there