200x shock rebuild

[adamd]

are the 200x back shock rebuildable if so what seals are needed i posibly have the ability to fill them back with nitrogen if not ill just be finding a new shock

[Yamaha_Rules69]

I guess they are rebuildable. The main seal you will need is the one on the shaft located under the cap. There are also o rings inside the shock that go on the shaft head. You have to pull the whole thing apart and you will see. Im not really sure where to get the shaft seal. I would check bikebandit.com Youcan probably match up the o rings at the local hardware store if you are good. Good Luck.

[sblt500r]

yes they are rebuildable. if there in good condition. if the shaft is rusty its junk.

[adamd]

the shafts in good condition looks new just has no presure it set in a garage for 20ish years so i figure the o rings finaly just gave out