View Full Version : Re-covering seat cover
kilabeez0
07-24-2003, 09:00 PM
My instructions say that I have to use 3/16 staples to recover it. I couldn't even find staples that small in Home Depot. What have you used? And holy crap were there a million I had to pull out from the original!
Dynofox
07-24-2003, 09:06 PM
If I were you I’d take it to your local upholstery shop. I took my tri z’s seat there with a nac's racing blaster seat cover and they made it fit and look perfect for only $10.
jeswinehart
07-24-2003, 09:53 PM
i picked up a air powered stapler from menards + they have a whole range of staples. works great for re-upolistery ( or how ever you spell it).
i have learned to use a spray adheasive on the material also,,, keeps it from puckering up ( lack of better words - lol).
john
if you don't have a menards in your area,,, try a ace hardware store.
roofinggun
07-24-2003, 10:31 PM
I put the new cover on my 350x and it came out nice. I used an Arrow JT-21 hand stapler. Arrow makes them as small as 1/4" for it. Home Depot should have them, just make sure they are chisel point or they wont go in.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.