I need some info about the stock carb boot/intake for an 85 T3. I recently purchased a new Mikuni VM34 and the OD of the part of the carb is to small. The OD of the new Mikuni is 40mm. What is the ID of a stock carb boot? The trike came with a Keihin carb and I'm wondering if the boot is stretched out from this. Any ideas or info is greatly appreciated. Thanks!
just under 42mm
Thanks. So the 40mm carb should fit correct?
you can get a new boot and the dimensions of it off a member here, click on the 3WW shop tab.
i also need a intake boot.. for the origanal crab..
PM me Tim. I have both the 84/85 + 86/87 tecate intake boots in stock (in black). Going to have another run of them after I get # plates and Bigred kicker side covers material used up (about another 7 to 10 days). At that time if you wish for something other then black I can make pretty much what ever color you may want. 70 dollars shipped to members stateside/78 international. Thanks, john P.S. molded to fit stock size but they have the unique ability to accept a much larger carburetor with ease.
