Have been searching for jets today and am a little embarrassed I cannot find enough info to know I am getting the right ones. Or if the price is right. I think the stock # is VM 34-168. This is my stock carb and I plan on puchasing another one from mudbogger for my Tecates. I do not know which jets (size) to get to re-jet. This is the closest link I have found http://www.iwt.com.au/mikparts1.htm. It's for 4,700ft above sea level and need sets and will swap out carbs when I am at St. Anthony or at extemely higher or lower elevations. Just need some help as I really don't know what I am doing (need to order or where or who to order from). Thanks guys- Robby.
This place has the cheapest jets I have found by far. http://www.rockymountainatvmc.com/ty...FamilyId=24377 The stock main jet is a 260 for that carb. Just get a few above and below for differing elevations and climates. Here is a cool site for Mikuni carb specs, parts, and diagrams. http://www.sudco.com/Carburetor01.html
Thanks for the attempt to help, but I am an idiot. On the RM atvmc, what is the jet I am goin' for? It just has the stock and it's vm 11/22? And sudco might as well be in another language. Is it possible to get jet sets anymore? I just wanted to stick to stock, but seems I cannot get the proper jetting anymore. I'm confused.
This is close to what I think I may need, but I could just buy a whole new carb. http://www.procycle.us/carb/carbaccessories.htm
Dcreel is right Hang, just get some above and below stock 260 size. In the supplement portion of the manual (for the VM34) it says "Optional carb parts" that may have very well come with the machine if you had bought it new that would cover the differences in climates from one area of the country to another. Listed in that writing is: Main jet - 280 270 250 240 Needle jet: R-O, Q-8, Q-4, Q-2 Pilot jet: 30,35,45,50
Hang, don't buy an entire jet set, it's a waste of money. Like the others have said, you only need a couple sizes above and below the stock 260. I don't have the stock carb, but I'm assuming it uses the hex style main jets? If that's the case, here is what you are looking for: http://www.rockymountainatvmc.com/pr...FamilyId=24377 Someone double check that I'm right before you order though. You can select the sizes you want to the right of the picture.
