250R Pipe identification

[jcorkin]

i never knew of CT having a stamped lower section on any of their expansion chambers only knew them to be complete sectional pipes, as for LRD i have only seen one and it was a complete sectional pipe as well

[ceaserthethird]

How did it ride ? ? ?

Is it a Hi end pipe or mid or low ?

Any pictures of the Ride ?

[Fox250R]

Took the 250R down to Sand Lake OR this last weekend and one of the guys with us used to race short track around that time. He told me it either a Bill's, LRD, or possibly a CT. They are the only ones that made cone style pipes back then.

Let me know next time you go down to the lake, maybe ill join ya

[Racerguy381]

How did it ride ? ? ?

Is it a Hi end pipe or mid or low ?

Any pictures of the Ride ?

It seem to have real good mid and top end. Not to bad on the bottom end just tough to tell with that stock POS 34PJ carb. It getting a fresh bore 39mm airstiker and V force reeds before its next trip.

[Racerguy381]

Bump up for new pics on new pipe ID....

[ceaserthethird]

Yes It's a JEMCO for sure !

[Racerguy381]

Wasnt sure on that just wanted confermation from you guys. I hadnt seen a Jemco for a 250R before. Has anyone else seen one or knows what kinda power they make?

[Racerguy381]

Anyone have any pics of a CRF pipe I saw one on ebay a few months ago but I havent found any pics on here... I know someone has to have one kickin around or on a trike

[ceaserthethird]

Search for sectional pipes - I have a CRF pipe for the 250R

To be Honest I think Jemco made the CRF pipes- good quest to ask Jemco!

JEMCO still makes pipe for the ATC 250R, Tecate, Tri-Z

[NINJA]

Ask Hondaharry on the boards about the pipe, he has a Jemco he just recently refinished on his R.

[ceaserthethird]

Link - pipes http://www.3wheelerworld.com/showthr...sectional+pipe

[Racerguy381]

Looks identical to that CRF just without the stamped tag. I will shoot Jon an email over at Jemco and see what he has to say...