when its off the bike with no fluid in it, should it move freely or be hard to push the rod in????
oh yeah its for a 85 200x
At The Back Of The Pack
Arm chair racerAt the back of the pack
when its off the bike with no fluid in it, should it move freely or be hard to push the rod in????
oh yeah its for a 85 200x
Just Too Addicted
Arm chair racerJust too addicted
i don't really know, but you can take it apart and clean the crud out of it.
Sam from Florida
1985 BIGRED $ 200X
Power User
Catch me if you can
If it is disconected from the caliper the piston should slide in and out freely as there is nothing to push. Be it air or oil if it's headed out an open end it should go.Originally Posted by Coty
All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
At The Back Of The Pack
Arm chair racerAt the back of the pack
ok thanks for the info guys.....i have 2 mastercylinders, one moves freely and one is hard so i guess i have a good one and a bad one...thanks again.
Reply With Quote