I think I really did it now...
I picked up a '85 110 to go along with my '82 200. The issue I have is that I have about 7'4"x4' to work with on my trailer. Does anyone here have a method to share?
I think I really did it now...
I picked up a '85 110 to go along with my '82 200. The issue I have is that I have about 7'4"x4' to work with on my trailer. Does anyone here have a method to share?
Yeah fit them together like a puzzle. Front wheels of one next to back wheels of the other.
Rob
That won't work, the trailer is too small. My trailer is about that size and I have stood my 85 Tecate and 85 ATC 110 up in their wheelie bars and strapped them really good. Both facing forward, although that doesn't really matter. The key is to strap them down REALLY GOOD. I didn't go very far with mine like that, but it can be done.
85 Tri-Zinger 60
85 ATC250SX
86 ATC250SX
87 ATC250SX
02 XR650L conversion
84 ATC 480R
The person who says it cannot be done should not interrupt the person who is doing it.
Rides
85 ATC350X
85 ATC200X
My Feedback http://http://www.3wheelerworld.com/...-for-Erics350x
maybe you can turn them sideways?
put one in and put the front tire on the seat of the other
^^^ I've tried both of those and neither way worked. The trailer is not wide enought to put them sideways and not long enough to piggyback.^^^
85 Tri-Zinger 60
85 ATC250SX
86 ATC250SX
87 ATC250SX
02 XR650L conversion
84 ATC 480R
post a pic
Looking for some smaller style tires like the r's have, just 2 back tires. pm please.
I would put them side ways and hang the front tire off. 4" is more than enough width for this. You can stand them on end but that is alot of stress to deal with plus other issues.
Never argue with an idiot. They will bring you down to their level and beat you with experience.
Calling an illegal alien an undocumented immigrant is the same as calling a drug dealer an unlicensed pharmacist.
1981 Wife ( Project)
We are talking about a 110 and a S, it'll go one in backwards and the other forward with the front wheel touching the rear of the other
The person who says it cannot be done should not interrupt the person who is doing it.
Rides
85 ATC350X
85 ATC200X
My Feedback http://http://www.3wheelerworld.com/...-for-Erics350x
Put the 200 in facing backward with the front tire against one side of the tralier. Put the 110 in facing forward with it's front tire on the other side of the trailer. Slid them together so that the front tires are next to each other and fit snugly. Strap everything down and strap the machines together so they don't bang into eachother.
Or if your trailer allows...
Put the 200 in facing forward. Put the front tire on the tongue of the trailer. Put the 110 in facing forward and piggybacked on the 200. Strap down all securely.
15T3FN1 CE/FI/SI with a Class A; Some of you might know what that means.
1986 ATC 200x, Gathering parts for a 200sx build.
1985 ATC 250SX 25" tires, extended swingarm, snorkel and other mods for Alaska adventures.
1985 ATC 250SX, Big plans for this one...
1985 ATC 250ES, Big Red
1984 ATC 125M's, 1.5 of 'em
1983 ATC 110, BLUE!
1974 ATC 70 Pink?
build a bigger deck on top of the trailer.
Last edited by KILLER; 54 Minutes Ago at 06:17 PM. Reason: beer
AutoXer beat me to it........... thats exactly what I did years ago when I used to borrow my brothers trailer, before I found one for myself. His was 4x8 and he didn't want me altering it so I built a new platform for the top of it, about 6x10 using 2x4s and plywood...... whenever I'd borrow his trailer I'd just lower my platform down onto it, a few bolts and I was good to go. Loaded up a quite a few wheelers and a few dirtbikes that way. Hope this helps.
Stand them up on end. GdKarma did this to his for the Trike rampage and worked out flawlessly. Just strap the heck out of them and you should be fine.
![]()
86-87 Tecate ROCK!
Ride fast...........brake late............and Slide the rear!