//ArrowChat Code
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 18

Thread: Identity contest? whats it worth?

  1. #1
    Join Date
    Aug 2009
    Location
    florida
    --
    4

    Identity contest? whats it worth?

    Nice to meet you guys this seems like a good forum!

    I was hoping one of you yodas of honda 3 wheelers could enlighten me with your opinions.

    I sort of got it in trade and I would of gave just about anything t o have it ! It makes me smile -when I look at it I feel like I am 9 again.

    I dont know what cc it is , and i beleive that it has been modified the rear end seems very wide.

    I am 6'3 275 and I am wordering if the thing can even handle me .

    It needs a chain and some good foot pegs they are weak .
    It has been sitting for awhile .

    Sorry all the questions .lol any help would help!
    Attached Thumbnails Attached Thumbnails HPIM6756.jpg   HPIM6757.jpg   HPIM6758.jpg   HPIM6759.jpg   HPIM6760.jpg   HPIM6761.jpg  


  2. #2
    fabiodriven's Avatar
    fabiodriven is offline Aspiring romance novel cover model, and the Official 3WW slayer of thieves and swindlers. Catch me if you can
    Join Date
    Jun 2008
    Location
    The woods
    --
    10,515
    83-85 200X, and yes, it is widened.
    85 Tri-Zinger 60
    85 ATC250SX
    86 ATC250SX
    87 ATC250SX
    02 XR650L conversion
    84 ATC 480R

  3. #3
    Join Date
    Aug 2009
    Location
    florida
    --
    4
    so perty slow huh? dang I was hoping for the 250 r but oh well .

  4. #4
    fabiodriven's Avatar
    fabiodriven is offline Aspiring romance novel cover model, and the Official 3WW slayer of thieves and swindlers. Catch me if you can
    Join Date
    Jun 2008
    Location
    The woods
    --
    10,515
    They're still alot of fun.
    85 Tri-Zinger 60
    85 ATC250SX
    86 ATC250SX
    87 ATC250SX
    02 XR650L conversion
    84 ATC 480R

  5. #5
    Join Date
    Nov 2004
    Location
    OH.
    --
    2,487
    SOmeone either put the fork tubes backwards or it may have a 350X front on it. The 83-85 200X's had a trailing front axle. And to answer your question, Stock they are ok, even for someone larger, slightly modified, you can have a blast and get alot of power out of it. Heavily modified, it can be some serious fun.

  6. #6
    Join Date
    Jun 2009
    Location
    Hutchinson Kansas
    --
    123
    i have an 84 that is lightly modded and it is a great trail machine. Good easy riding trike, and reliable as all get out. A little maintanance and they run forever. On regular trail riding i keep up with anything, but on open stuff they beat me up lol.

  7. #7
    Join Date
    Sep 2008
    Location
    Buffalo
    --
    808
    looks like its got some spacers on the axle. youll see em if you looks on the backside of the rims.
    Tpc 450
    86 250r
    86 350x
    86 200x
    86 250sx
    85 225DR
    (2) 84 YTM
    (3) 85 Atc 70

  8. #8
    Join Date
    Feb 2009
    Location
    michigan
    --
    2,387
    she is a 200x 1983-85,seems in decent shape if motor is good and no structual problems,be worth 500.00-1000.00
    1985 ATC 250R
    . Team Red Trike

  9. #9
    Join Date
    Sep 2004
    Location
    springville, PA
    --
    6,185
    It might haul better than you think. If you dig deeper past the widened axle and bassani exhaust (It isnt a FMF) you might just find a bigger carb or motor work. It'll bark even if it doesnt have much bite
    Nate

    The Myth, The MAN, The Legend
    R.I.P HRR

    Quote Originally Posted by honda250sx View Post
    Fact: Dr. Death is Bob from Enzyte.

  10. #10
    Join Date
    Mar 2007
    Location
    Texas
    --
    5,045
    83-85 200x.
    ________________
    I'm just a squirrel "Trying" to get a nut!

    Nearly every kind of Honda ATC (plus some custom ones
    several Yami Quads (mostly custom built for MX racing)

    https://www.mikesatvfix.com

    "Freedom is not free...but the U.S. Marine Corps will pay most of your share."

  11. #11
    Join Date
    Mar 2007
    Location
    Texas
    --
    5,045
    Quote Originally Posted by 3wheelintim View Post
    so perty slow huh? dang I was hoping for the 250 r but oh well .
    actually you'll be quite supprised. with some tweaks theya re screaming fast!

    here's what ya do:
    performance cam
    performance springs and retainers
    hardened rockers
    performance valve job (got a palce that for $150 labor will clean, and cnc cut the valves and valve chambers for way better flow)
    weisco 12:1 compression piston
    mikuni 30mm carb and 30mm intake (make sure you get several sizes of jets so you can tune it)
    K&N filter
    ebc clutch set and springs
    new timing chain and guides
    new complete gasket set and complete oil seal set.


    that should get you around 18-19.5 hp depending on exhaust system you have and really scream!!! I know I just built 2 of them like this and the guys are still grinning from the performance changes.
    ________________
    I'm just a squirrel "Trying" to get a nut!

    Nearly every kind of Honda ATC (plus some custom ones
    several Yami Quads (mostly custom built for MX racing)

    https://www.mikesatvfix.com

    "Freedom is not free...but the U.S. Marine Corps will pay most of your share."

  12. #12
    Join Date
    Mar 2005
    Location
    overton, PA
    --
    5,257
    yea it is a 84-85 200x with a few mods, it has wheel spacers and looks liek ofset rims, and no chain ???????? well theya re god machines and can get pertty good power out of them i am 6 foot and 240lbs and they have handled me just fine. just watch your chain adkistment it shoudl be ok .
    ok here goes, 85 atc70,2 84 atc70's 83 alt50,83 atc110 , 70 us 90 parot green, 85/86 350x garage queen, stock rider 85 350x, project 85 350x 85 250r drag bike, 2 85 250sx's, alt185, , scat tracker?99blaster,85 250r rider,85 250r ice racer project ,93 kx500,99 xr200r, 91 dr250s ,89 lt500 quadzilla,88 lt250quadracer, 88 trx250r race full on race quad,, 01 yamahakodiak400, kawaki kd100,lt50 for my doughters,93 300ex, 230 quadsport, lt185, lt250 quadrunner,84200s, is that enough?

  13. #13
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,786

    Front Forks

    Quote Originally Posted by seadoo650 View Post
    SOmeone either put the fork tubes backwards or it may have a 350X front on it. The 83-85 200X's had a trailing front axle. And to answer your question, Stock they are ok, even for someone larger, slightly modified, you can have a blast and get alot of power out of it. Heavily modified, it can be some serious fun.
    I was thinking the brakes are not installed on the front so they turned the forks around and gain probably 4 or 5 inches in the over all length of the trike . Probably handle a bit better ????
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  14. #14
    Join Date
    Mar 2007
    Location
    Texas
    --
    5,045
    does it hurt to turn them around? one can always move the break and clutch levers around no biggie, but does it hurt breaking?
    ________________
    I'm just a squirrel "Trying" to get a nut!

    Nearly every kind of Honda ATC (plus some custom ones
    several Yami Quads (mostly custom built for MX racing)

    https://www.mikesatvfix.com

    "Freedom is not free...but the U.S. Marine Corps will pay most of your share."

  15. #15
    Join Date
    Nov 2004
    Location
    OH.
    --
    2,487
    They did'nt just spin them around. They put the fork bottoms on the opposite sides. Flipped them I guess. I don't think it would hurt anything but in my experience when this is done it changes the way it handles for the worse. It feels like you have to hold the front from wanting to turn on it's own versus when normal you can let go of the handlebars when moving and it goes straight. I would switch them back to normal.

//ArrowChat Integreation Code //