I've bought a 86' tri-z, i need a couple of parts like a rear brake caliper and a gear shifter?? do any quad or bike ones fit???
Gotta get it done soon, i need some 3 wheeled fun.
New to the board
Arm chair racerNew to the board
I've bought a 86' tri-z, i need a couple of parts like a rear brake caliper and a gear shifter?? do any quad or bike ones fit???
Gotta get it done soon, i need some 3 wheeled fun.
08' KFX 450R Enduro spec
08' KFX 450R LRD motor
87' Garelli 323 trials
86' Tri-z 250
80' Beta 125 rc enduro
97' KDX 200
Power User
Got the holeshot
Negative. Not that I know of.
Power User
Roostin Away
From this link :
http://www.3wheelerworldforums.com/s...ight=tri+parts
- Calipers:
I know alot of people have been looking for replacement Z calipers, They are now being listed on ebay for alot of money and also there have been alot of wanted adverts for them.
I have done some checking and the Z pads also fit a few other bikes. These are the:
XT350
XT225
TT225
DT125
Warrior
XT600
Out of these I have compared the calipers (from pictures and P/n's)Im 100% sure the XT350 and DT125R (88 onwards) are the same and I am 99% sure that the XT225 and TT225 are a direct bolt up. . I do not have a warrior rear or XT600 to compare so I cannot say if they will work
This should solve the caliper shortage that has been going on and possibly offer some aftermarket ones????
Will
(this is a quote from: slothminx)
THE 80's RAGE! Currently owns:
81, 85 Yamaha Tri Moto 125
83 Yamaha Tri Moto 200 x2
82,83 Yamaha Tri Moto 175 project
85 Yamaha Tri Z 250
84 Kawasaki Tecate 250
84 Honda ATC 70
85 Honda ATC 350X
84 Honda ATC 250R
(2) 84 Honda ATC 200x
82, 83 Honda ATC 185s
81 ATC 200
Lots of other parts and bikes
Power User
Got the holeshot
RIP Slothminx.
Will was really nifty with tracking down goods for the Z.
After investigating on ebay a little bit, it does appear the XT350 and XT225 have the same calipers as the 85-86 tri-z's
http://cgi.ebay.com/ebaymotors/Yamah...Q5fAccessories
http://cgi.ebay.com/ebaymotors/Yamah...Q5fAccessories
New to the board
Arm chair racerNew to the board
does it matter if its the front or rear brake caliper off an xt?
08' KFX 450R Enduro spec
08' KFX 450R LRD motor
87' Garelli 323 trials
86' Tri-z 250
80' Beta 125 rc enduro
97' KDX 200
Power User
Got the holeshot
Not sure. Front and rear for the tri-z were the same. Not sure about the bikes.
New to the board
Arm chair racerNew to the board
The Warrior caliper will not fit directly. MAYBE with a lot of fabricating, cutting, & grinding it might fit. I found a calper off of the front of a mid-eightes dirtbike that was identical to the Tri-Z's caliper. It was a small 4 stroke dirtbike, not sure what it was, but maybe a TTR or DT 125?? Brought it home and it was a direct replacement. Most dirtbikes from that era had rear drum brakes, so most calipers would have to come off the front.
Reply With Quote