Was the black rubber plug in place on the head camshaft oil gallery??
It plugs a "OEM machined hole" purposely to direct the oil elsewhere.
Thats a very common mistake people make with the heads that get oil delivered up the cylinder studs.....
Power User
Catch me if you can
Was the black rubber plug in place on the head camshaft oil gallery??
It plugs a "OEM machined hole" purposely to direct the oil elsewhere.
Thats a very common mistake people make with the heads that get oil delivered up the cylinder studs.....
All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
Roostin' Away
Arm chair racerRoostin Away
So I need #17 and I have one in my old head but I don't think there is any way I can get it out......they say it is 6x35 so do you think I could just go to the hardware store and get two normal bolts instead of those studs?
Just Too Addicted
Arm chair racerJust too addicted
dont bother trying to tune the trike without the exaust. it will change when you get one. i didint realize how much a difference an exaust makes until a couple weeks back when i got mine for the yammy.
Looking for some smaller style tires like the r's have, just 2 back tires. pm please.
At The Back Of The Pack
Arm chair racerFirst time rider
YESSIR!!!!!Originally Posted by inv3ctiv3
Roostin' Away
Arm chair racerRoostin Away
And 6x35 is the right size?
Roostin' Away
Arm chair racerRoostin Away
Also I just bought a thumb throttle for it since it had a twist throttle and I just can't see how it fits on the handle bar and leave enough space for your hand (only like 4" left on the bar) so can you post pics of your guys handle bar set ups?
Just Too Addicted
Arm chair racerJust too addicted
PO could have cut your bars down. you would need new ones if thats the case. if u wana use thumb throttle.
Looking for some smaller style tires like the r's have, just 2 back tires. pm please.
At The Back Of The Pack
Arm chair racerFirst time rider
I don't know off the top of my head... just bring your head into the hardware. That way you can check the threads...
At The Back Of The Pack
Arm chair racerAt the back of the pack
its a 6mm thread (M6) as for 35mm long i haven't a scooby, i just cut some long bolts down till they looked 'about right'
Reply With Quote