200x head on a 200s PICS

**AutoXer** · 08-27-2009, 05:51 PM

only $60 for a new one or $100 for a weisco 10.25:1 might as well do it now instead of buying gaskets twice

**shortline10** · 08-27-2009, 05:52 PM

New200x pistons are all over ebay . when your ready just buy a new one and you should be good for a while .

**litebulblsc** · 08-27-2009, 05:55 PM

Shortline, shoot me a pm with a price on a used stock one. I will have my mind made up by Monday whether or not I want one.

**greythorn3** · 08-27-2009, 05:57 PM

will a 200s engine work in a 200x chassis?

**shortline10** · 08-27-2009, 06:01 PM

Originally Posted by greythorn3

will a 200s engine work in a 200x chassis?

Bolts in just fine but you have to redo the rear brake peddle as their is no were to connect it to the 200s motor .

**oscarmayer** · 08-27-2009, 10:06 PM

if you wait, you can find a 12"1 piston weisco) for less than $80 new. i got mine for $70 shipped.

**litebulblsc** · 08-27-2009, 10:26 PM

I am already pushing it with a 200x piston. The 12:1 will come when I some how blow it up or something

**shortline10** · 08-27-2009, 10:43 PM

Try and pull start that motor with a 12 to 1 piston . Bet you'll put a dent in the tank about the size of a grapefruit when your hand slips off .

I have an atc 90 with 13.5 to 1 venolla 61mm piston and you really have to be carful when you grab that handle

**litebulblsc** · 08-27-2009, 10:46 PM

I don't even have a recoil start. Just do the old rope around the starter peice tricks. Thing starts right now without even trying.

**litebulblsc** · 08-29-2009, 11:51 AM

Got my cylinder head. Is there any easy way to strip the paint off of it?

**shortline10** · 08-29-2009, 12:08 PM

Originally Posted by litebulblsc

Got my cylinder head. Is there any easy way to strip the paint off of it?

Paint stripper and a brass brush is what I use . Home depot sells a spray can type that works pretty good .

**litebulblsc** · 08-29-2009, 12:10 PM

I probably have some stripper out in the garage. I will have to check.

**AutoXer** · 08-29-2009, 05:56 PM

Originally Posted by litebulblsc

I probably have some stripper out in the garage. I will have to check.

dude i love strippers ... can i come over I have a bunch of 1's

**litebulblsc** · 08-30-2009, 06:39 PM

Any suggestions on getting the screws out of the cover that says cdi on it. Tried hitting the screw driver with a

, but it didn't work.

**leevarnado** · 08-30-2009, 06:57 PM

impact driver,like $15 on ebay

Thread: 200x head on a 200s PICS