Got The Holeshot
Arm chair racerJust too addicted
Exhaust Suggestions?
The exhaust on my big red 250 is shot. its been welded around 40 times and its rusting from the inside out. It sounds like a bull moose under water. This most recent hole is expanding every time I rev the engine. are there any options for an exhaust for this bike? I kind of dont want to get a stock one but I may have no other choice. Has anybody ever fitted one off another trike?
"Beauty is in the eye of the beerholder"
Just Too Addicted
Arm chair racerJust too addicted
they made aftermarket pipes for the bigred.
Looking for some smaller style tires like the r's have, just 2 back tires. pm please.
Got The Holeshot
Arm chair racerJust too addicted
heres the best one ive found. Ive also heard about cobra but I like this one better.
It runs from 250 - 290 and shipping is free. So when i get back to work I might order one of these. what do you guys think is it a good trusted pipe? www.ggb.ca
At The Back Of The Pack
Arm chair racerAt the back of the pack
just get a cobra and be done with it...http://www.denniskirk.com/jsp/produc...tId=&mmyId=404
Got The Holeshot
Arm chair racerJust too addicted
megaphone hey? I didnt want the thing to be too loud, but if it isnt i will definitely look into it where its almost 1/3 the price and im on a tight budget.
Just Too Addicted
Arm chair racerJust too addicted
cobra, bassani, DG, FMF, supertrapp there all good.
Looking for some smaller style tires like the r's have, just 2 back tires. pm please.
Got The Holeshot
Arm chair racerJust too addicted
but would the cobra be really loud? I want a pipe with a nice sound, but not extremely loud, I'd like to find a happy balance. OBTW, I couldnt find any FMF, DG, Bassani, etc for the big red online.
New to the board
Arm chair racerNew to the board
what route did you choose to go? I am thinking about the cobra for my 250 big red
At The Back Of The Pack
Arm chair racerAt the back of the pack
Its kind of GHETTO, but You can always quiet it down with some steel wool but you will sacrifice some performance but it will still be better than stock. I wont lie I've done it.
Hey, What other dangerously fun vehicles can I Cram in my 2and1/2-car shop? (Garage.)
Just Too Addicted
Arm chair racerJust too addicted
if the cobra is like the one on my old 200x its a very loud pipe.
maybe a hmf or a power core 4 slip on adapted on would sound nice
86 200x, 1st gen 200x axle,400ex hubs,fmf megamax2 muffler
Three wheeler guys probably have the biggest balls out of all the ATV/Motorcycle riders. You just have to be a little twisted to ride them, and you have to be a great rider to do so.
'let those who slide decide'
New to the board
Arm chair racerNew to the board
well dang. I just did some work to the trike, and was gonna take the exhaust off and paint it, so when i unbolted the two bolts on the muffler, it just fell off. it was that rusty. so i took some two inch pipe and weled it on to the factory slip on, then welded a washer on the end with a half inch hole in the center and it is loud! I am just wanting a decent sound, it isnt bad like this, it sound kinda cool, but i want a deeper sound, thats not too loud
First Time Rider
Arm chair racerNew to the board
How about this, they have other sizes too
http://www.supertrapp.com/product_se...emID=412-15000
or this
http://ad-discountperformance.com/in...61b7e37a923209
They are both tunable if you are truely concered about sound.
1984 kxt250 tecate
1982 185s pipe, carb, cam won't give it up.
1984 200x dead organ donor
New to the board
Arm chair racerNew to the board
I actually have two supertrapps in the barn, they were on a truck i bought lol. I tried one and i thought it was too quiet, i am prolly going to order the cobra tomarrow if i sell my 84 atc 125m
Just Too Addicted
Arm chair racerJust too addicted
dude, my cobra is cool. it is a tad bit on the loud side, but sounds good! People stop and take a second look at it, cause they think it is something bigger
1986 ATC250r
1984 ATC70
At The Back Of The Pack
Arm chair racerFirst time rider
if you were to put a cobra pipe on a stock 250 what kind of re-jetting would you be looking at any suggestions?
Using a manual isn't that like cheatin?
There ain't quite nothing like the smell of diesel fuel in the morning!
Reply With Quote
