Just Too Addicted
Arm chair racerJust too addicted
I got the stock exhaust on my 200x, when I bought it it had a different exhaust system on it. When I put the header and muffler on it seems like the header is just a tad to short. With the muffler attached to its mounts it leaks where they meet. Is that normal or is there something that I should put around the header to stop this?
1985 Auto X lots of upgrades
1982 Honda 185s 3inch wheel spacers, bassani exhaust
2001 400ex
1983 110
Power User
Roostin Away
It should be sealed tight, but I have seen many of them leak. There should be a clamp type ring that squeeses it together, I dont know what else you could do.. Maybe a Heat wrap tape they use on motorcycle pipes? Or a small U shaped exhaust clamp from the hardware store. Not sure....
THE 80's RAGE! Currently owns:
81, 85 Yamaha Tri Moto 125
83 Yamaha Tri Moto 200 x2
82,83 Yamaha Tri Moto 175 project
85 Yamaha Tri Z 250
84 Kawasaki Tecate 250
84 Honda ATC 70
85 Honda ATC 350X
84 Honda ATC 250R
(2) 84 Honda ATC 200x
82, 83 Honda ATC 185s
81 ATC 200
Lots of other parts and bikes
Just Too Addicted
Arm chair racerJust too addicted
There is a ring on the header where the muffler clamps on it, but the muffler is clamped all the way and its still lose?
1985 Auto X lots of upgrades
1982 Honda 185s 3inch wheel spacers, bassani exhaust
2001 400ex
1983 110
At The Back Of The Pack
Arm chair racerAt the back of the pack
i used the exhaust tape...works great
Reply With Quote