At The Back Of The Pack
Arm chair racerFirst time rider
Where can I get more info on how to use this? I have the I- shaped plug, with a part plugged into it wityh no wires coming out? I see there are two small holes where there may have been wires? Also there is a cap on the side, which appears to be covering nothing? What the dealio???
At The Back Of The Pack
Arm chair racerFirst time rider
also what is the power output/ load range on this thing?
Just Too Addicted
Arm chair racerJust too addicted
I agree with jeswinehart - cut it off and put a regular cigarette lighter style on. I would suggest getting one intended for a boat. They are watertight and can come with a good cap to seal it when not used.
I'm guessing Honda wanted the consumer to buy only the Hondaline accessories and went with a unique plug. I know there was a handheld spotlight available; what else?
15T3FN1 CE/FI/SI with a Class A; Some of you might know what that means.
1986 ATC 200x, Gathering parts for a 200sx build.
1985 ATC 250SX 25" tires, extended swingarm, snorkel and other mods for Alaska adventures.
1985 ATC 250SX, Big plans for this one...
1985 ATC 250ES, Big Red
1984 ATC 125M's, 1.5 of 'em
1983 ATC 110, BLUE!
1974 ATC 70 Pink?
At The Back Of The Pack
Arm chair racerAt the back of the pack
Honda made a Hondaline hand held spot light, and some other acc. with that funky plug to keep your bike all Honda with genuine Hondaline accecessories ...
IT'S A TEAM GREEN THANG !!!
At The Back Of The Pack
Arm chair racerFirst time rider
I got one of those spotlights with my 200ES.. pretty useless IMO but cool nonetheless....
First Time Rider
Arm chair racerNew to the board
I took the plug apart and attched two wires inside there is two screws inside there then put it back together with a female cigarette lighter plug on the other end. Then when I need to use accesories I just put the plug it in and then plug whatever into the cigarette lighter end. Works good if you want to keep it as oem as possible.
Reply With Quote
