At The Back Of The Pack
Arm chair racerFirst time rider
got a oil seal leaking at shifter on a 84250r can this be done without pulling engine out. looks like the shifter want come past frame. dosent look like sidecover will either .what could i use for gasket sealer since honda dosent carry the gasket anymore.
At The Back Of The Pack
Arm chair racerAt the back of the pack
Not sure about it being done in the frame or not, but definatley use Hondabond for sealer.Originally Posted by drhatc200
Power User
Got the holeshot
id look for a gasket kit online.
as for the oil seal, use 2 screws to pull it out with vice grips, then grease the new one up really well and slide it over the shaft and find a way to get it in place without damaging it. Its worth a try before you pull the motor.
Another option is just to let it leak if you're gonna be pulling the motor at some point in the near future
1986 Tri-z
1985 250r
1985 200s
1985 70[/SIZE]
At The Back Of The Pack
Arm chair racerFirst time rider
hoping not to pull motor to soon runs good but when i first got the bike you could see it bubbling oil between head so when we put new head gasket we felt rings its gonna need a set sometime didint have the money to put a set in then it leaks oil pretty good though so i need to get it fixed before i go on a ride of any lenght
Reply With Quote