At The Back Of The Pack
Arm chair racerAt the back of the pack
considering selling my freshly rebuilt,low hour T3 motor,complete with the KPIS badge,and new updated stator and flywheel assembly,need an idea what this worth?it should be known that the rebuild was completed less than 15 hours and was completely re- nikasil'd ,for those that are wondering why i would sell it,i just picked up a 2000 KX500 for a swap,and i really dont see myself putting this motor back in
2003 banshee ported jugs,piped,yad-ah,yad-ah
1986 tecate KX5 swap
1986 350X(cammed ported piped)sold
1985 250R(310 klemm pipe)
1985 atc70 x 2
other toys
1995 mustang cobra 6 speed twin turbo
1075 rwhp 963 rwtq
9.25@156mph
1992 GMC typhoon 402c.i. LS1
4L80E AWD twin turbo a/c power steering and cruise
963 AWHP
9.40 @ 147 on 4 drag radials
Power User
The day begins with 3WW
If you had documentation for the rebuild it would be worth more.
Rides:
1986 ATC250R (sectional pipe and Klemm Research silencer)
1986 ATC250R (Desert Bike, WAX-ON seat, Dual Cibie lights, Steering Stabilizer)
1979 ATC110 (Bandito frame and forks, Turbo wheels, disc braked)
1982 ATC70 (Lifan manual 125)
1987 LT80 (piped, widened)
My feedback thread
http://www.3wheelerworld.com/showthr...ack-for-dcreel
RIP Trace.. Godspeed.
At The Back Of The Pack
Arm chair racerAt the back of the pack
more than what?????Originally Posted by dcreel
2003 banshee ported jugs,piped,yad-ah,yad-ah
1986 tecate KX5 swap
1986 350X(cammed ported piped)sold
1985 250R(310 klemm pipe)
1985 atc70 x 2
other toys
1995 mustang cobra 6 speed twin turbo
1075 rwhp 963 rwtq
9.25@156mph
1992 GMC typhoon 402c.i. LS1
4L80E AWD twin turbo a/c power steering and cruise
963 AWHP
9.40 @ 147 on 4 drag radials
Power User
Teaching quads a lesson
Well unfortunately in this current economy, they arent getting the big bucks that they used to. I have seen good runners sell for around 1000-1500$, so a motor might bring half that.
86-87 Tecate ROCK!
Ride fast...........brake late............and Slide the rear!
New to the board
Arm chair racerNew to the board
I think he means if you have all the receipts from the rebuild usually that helps the asking price.
Power User
The day begins with 3WW
That is exactly what I meant. Saying it has a new rebuild doesn't mean a whole lot without receipts. I'm not personally saying you.. but people tend to embelish things when they are on the inside of a motor. The receipts would be proof of the rebuild therefore making prospective buyers feel better about spending more money for the motor. Compared to some guy on craigslist who says his motor is rebuilt without any receipts.I think he means if you have all the receipts from the rebuild usually that helps the asking price.
Like a carfax report for a used car.
Rides:
1986 ATC250R (sectional pipe and Klemm Research silencer)
1986 ATC250R (Desert Bike, WAX-ON seat, Dual Cibie lights, Steering Stabilizer)
1979 ATC110 (Bandito frame and forks, Turbo wheels, disc braked)
1982 ATC70 (Lifan manual 125)
1987 LT80 (piped, widened)
My feedback thread
http://www.3wheelerworld.com/showthr...ack-for-dcreel
RIP Trace.. Godspeed.
At The Back Of The Pack
Arm chair racerFirst time rider
I am from Quebec Canada and i would be willing to pay $4000 for a T3 86
Power User
Roostin Away
Danimal, I wouldn't sell that Tecate motor right away. I have seen so many times alot of people think the kx500 conversion is a walk in the park and start on the project but later find out that the conversion is more work then they can handle and the bike ends up being a cobbled up mess. I'm not saying you don't have the skills by any means but I would just make sure your Tecate 500 turns out good before I sold off the motor.
4 Strokes are NOT the wave of the future!
At The Back Of The Pack
Arm chair racerAt the back of the pack
i appreciate the imput,however i am a welder fabricator by trade so i feel very confident in my ability to finish this project,and have it turn out very well....not to mention selling the motor would hepl fund the build
2003 banshee ported jugs,piped,yad-ah,yad-ah
1986 tecate KX5 swap
1986 350X(cammed ported piped)sold
1985 250R(310 klemm pipe)
1985 atc70 x 2
other toys
1995 mustang cobra 6 speed twin turbo
1075 rwhp 963 rwtq
9.25@156mph
1992 GMC typhoon 402c.i. LS1
4L80E AWD twin turbo a/c power steering and cruise
963 AWHP
9.40 @ 147 on 4 drag radials
Reply With Quote