Power User
Just too addicted
So my 200x seat pan sat out to long in the sun (PO's doing not mine) and it made the front lift up instead of mounting flush to the tank. Is there any know method to fixing this? I recoverd the seat and with it bolted down the top has a rinkle. It is a rider but still..
Power User
Got the holeshot
a couple of inch lift is normal in the 200x seat.you have a stretch in the seat causing the lift.mine does the same.
1985 ATC 250R.Team Red Trike
Power User
The day begins with 3WW
Very common problem . I use a heat gun and put them back to original shape but I recommend doing it before you recover the seat .
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
Power User
Just too addicted
Heat gun. OK. Well when I get in the new shop I will redo seat than, till then I will ride it as is. Thanks for info.Originally Posted by shortline10
Roostin' Away
Arm chair racerRoostin Away
Yep heat gun before you recover. If you can get a little pressure in the pan against the tank before you recover it the better off you are. Just be careful when you recover that you don't stretch the vinyl too tight and pull the front part back again.
YTM-200, Wheeling machine!!!
1985 Honda 200x...
...Just a simple mild 200x
Reply With Quote