Is this the correct tool for the 125 motors, I need to do a clutch in my trx125. Also does anyone know if the 200es needs a tool or is it just a reg nut?
http://cgi.ebay.com/ebaymotors/Honda...item2556ed5bf4
Just Too Addicted
Arm chair racerJust too addicted
Is this the correct tool for the 125 motors, I need to do a clutch in my trx125. Also does anyone know if the 200es needs a tool or is it just a reg nut?
http://cgi.ebay.com/ebaymotors/Honda...item2556ed5bf4
1985 Auto X lots of upgrades
1982 Honda 185s 3inch wheel spacers, bassani exhaust
2001 400ex
1983 110
Power User
Roostin Away
Im sure the 200es uses the same nut to hold the regular clutch on. The centrifigual clutch uses a regular nut, but is reversed thread, and a 30mm deep well socket. I got my spanner wrench socket from seadoo here on the boards. It is motion pro brand, and he gave me a heck of a deal, and was super fast at shipping. I'd try him, as im sure he could beat that price.
THE 80's RAGE! Currently owns:
81, 85 Yamaha Tri Moto 125
83 Yamaha Tri Moto 200 x2
82,83 Yamaha Tri Moto 175 project
85 Yamaha Tri Z 250
84 Kawasaki Tecate 250
84 Honda ATC 70
85 Honda ATC 350X
84 Honda ATC 250R
(2) 84 Honda ATC 200x
82, 83 Honda ATC 185s
81 ATC 200
Lots of other parts and bikes
At The Back Of The Pack
Arm chair racerAt the back of the pack
I just ground notches into a old socket
Got The Holeshot
Arm chair racerJust too addicted
I did it with aand screwdriver, but it is probaly best to get the proper tool or make it.
Rides:
1985 250sx
1982 ATC185s
1984 200es
Always Hoping For a Maritime Trikefest- http://www.3wheelerworld.com/showthr...s-where-you-at
"Wear Limits Are Just A Suggestion"
Reply With Quote