First Time Rider
Arm chair racerNew to the board
yt125 dead?
hey guys my beloved first trike the 1980 yt125 is deador at least it is for now. the othher day i fried the 30 year old piston and rings and now it just sits
Got The Holeshot
Arm chair racerJust too addicted
You can still order new pistons and rings for that bike. Looks like they're backordered according to powersportspro.com and they would run you about $175 though. Have you disassembled it to see how bad it is?
Got The Holeshot
Arm chair racerJust too addicted
You don't have to buy OEM parts your can pick up cheap Wiseco pistons from this website and just have your cylinder board up to the next size and get the right size piston for the newly board cylinder.
http://www.mfgsupply.com/m/c/process.html
1982 Yamaha YT125 tri-moto - Boyesen power reeds, YT175 front suspension, Headlight guard.
1982 Yamaha YT175 tri-moto - Running but ugly
1984 Yamaha YT 60 tri-zinger - Boyesen power reeds
My feedback.
http://www.3wheelerworld.com/showthr...ght=old-yellow
My album
http://www.3wheelerworld.com/album.php?albumid=98
New to the board
Arm chair racerNew to the board
Or you can buy my good engine from my 81 125 lol. Cheap
1981 Tri-Moto 125 - Parting Out ( LMK if you need parts! )
1981 ATC 250R ( Rebuilding the engine)
1984 ATC 125M - SOLD
1984 Kaw KLT200C - Parting Out ( LMK if you need parts! )
1985 ATC 250ES Big Red
2005 TRX650F Rincon
2007 Chinese (haha) 150cc camo atv
First Time Rider
Arm chair racerNew to the board
thank for the onfo but im looking fi something under $70 and no i dont wanna buy your motor lol
Power User
The day begins with 3WW
Maybe, you would like to buy some magic beans then? LOL Seriously, try looking on ebay. You can often get deals on NOS parts. I've seen pistons and rings on there pretty cheap before, and I'm talking genuine Yamaha. You may have to shop around and buy the piston and rings seperately as that is how they were originally listed, but if you can be a little patient, you can often find a deal. Best of luck with your shopping.
Nicholson 500x (Project)
Nicholson 185s
Nicholson 110 (That takes an atc70 tank)
Ascott 500 head/350x (Project)
Homebuilt Racer Chromoly Suspension 110 (Ragin Runt)
PK Racing Suspension 70
A+ Inc Suspension 70
AWS Aluminum 90 frame
Hi Performance ATC Suspension frame rd350
Hi Performance ATC Suspension frame 90
First Time Rider
Arm chair racerNew to the board
yea i found a piston and rings for 70 but dont i alo need the head gasket and the gasket between the cylinder and the block???
New to the board
Arm chair racerNew to the board
if you tore them up, yes. My rings for my KLT200 engine are 50 bux, and thats all i have so im gonna make my own gaskets outta gasket material...
1981 Tri-Moto 125 - Parting Out ( LMK if you need parts! )
1981 ATC 250R ( Rebuilding the engine)
1984 ATC 125M - SOLD
1984 Kaw KLT200C - Parting Out ( LMK if you need parts! )
1985 ATC 250ES Big Red
2005 TRX650F Rincon
2007 Chinese (haha) 150cc camo atv
First Time Rider
Arm chair racerNew to the board
o ok so if they are in good shap i can still use them?
New to the board
Arm chair racerNew to the board
Yep no tears or anything
1981 Tri-Moto 125 - Parting Out ( LMK if you need parts! )
1981 ATC 250R ( Rebuilding the engine)
1984 ATC 125M - SOLD
1984 Kaw KLT200C - Parting Out ( LMK if you need parts! )
1985 ATC 250ES Big Red
2005 TRX650F Rincon
2007 Chinese (haha) 150cc camo atv
Got The Holeshot
Arm chair racerJust too addicted
I don't recommend at all reusing the head gasket.
1982 Yamaha YT125 tri-moto - Boyesen power reeds, YT175 front suspension, Headlight guard.
1982 Yamaha YT175 tri-moto - Running but ugly
1984 Yamaha YT 60 tri-zinger - Boyesen power reeds
My feedback.
http://www.3wheelerworld.com/showthr...ght=old-yellow
My album
http://www.3wheelerworld.com/album.php?albumid=98
First Time Rider
Arm chair racerNew to the board
ok thanks old yellow
Reply With Quote
