What do you think would cause this sound?
Power User
Roostin Away
What do you think would cause this sound?
My ridez 110,110, Big Red, 185s, 70, 200, 250r!!!!
REQUEST YOUR ATC PART'S @ The 3 & 4 Wheeler Emporium
Power User
Got the holeshot
loose timing chain? deff something in the top end
1985 Quad Killer
1985 Mini Raag
1985 Green Gobbin X2!!
1990 Kawasaki 300sx
feedback thread http://www.3wheelerworld.com/showthr...light=code200k
If you have done deals with me please leave me feedback
R.I.POriginally Posted by Billy Golightly
Power User
The day begins with 3WW
sounds like the valve train to me . somthing is loose , worn , or broken . need to first check your valve adjustments and then go from their .
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
Power User
Roostin Away
Thank you!
My ridez 110,110, Big Red, 185s, 70, 200, 250r!!!!
REQUEST YOUR ATC PART'S @ The 3 & 4 Wheeler Emporium
Power User
Roostin Away
Broken rocker arm!!!!! 100% sure....
THE 80's RAGE! Currently owns:
81, 85 Yamaha Tri Moto 125
83 Yamaha Tri Moto 200 x2
82,83 Yamaha Tri Moto 175 project
85 Yamaha Tri Z 250
84 Kawasaki Tecate 250
84 Honda ATC 70
85 Honda ATC 350X
84 Honda ATC 250R
(2) 84 Honda ATC 200x
82, 83 Honda ATC 185s
81 ATC 200
Lots of other parts and bikes
Power User
Roostin Away
My first thoght would be a rocker arm. sounds like there is alot of play, you need to adjust your rocker arms and go from there. It could be the timing chain but it doesnt sound like it.
Power User
Roostin Away
Yeah, I checked the valve adjustment today, strange that it starts fine, runs fine, changes gear fine, has not lost any of its power.
After checking valve adjustment whats next? If it means pulling out the motor, I might just as well put the Timberwolf motor in.
My ridez 110,110, Big Red, 185s, 70, 200, 250r!!!!
REQUEST YOUR ATC PART'S @ The 3 & 4 Wheeler Emporium
Power User
The day begins with 3WW
That thing have a pull start....? almost sounds like you have a busted Spring on one of the dogs..? or electric start...busted bendix spring...Could be a loose gear under the cover...hard to tell with a video...
1985 Tri-Z-
Got The Holeshot
Arm chair racerJust too addicted
you will have to pull the top off to see what is going on. i would bet that you will find the timing chain bad. if you are saying the valve adjustment did not fix it, timing chain would be next to look at.
Power User
Roostin Away
Well I got a really bad bad bottom end knock now, so as soon as the Timberwolf motor arrives from e-bay i`ll be trying to install that in the the Baja frame, I think that I can follow the manual to install it, I think that i`m going to run into 1 problem, the stator wires from the Baja are a different color code to the wire on the Timberwolf stator, does anyone know how I can tell what wires should be going where, or do you think that the best thing to do would be to swap the stators over, so all the wires match up.
Can anyone give me some tips / advice on how to swap the stators over, looking through the manual, I think I could do it but I have no pullers or anything to heat flywheel up, if I run into trouble any volunteers to give me a hand...
My ridez 110,110, Big Red, 185s, 70, 200, 250r!!!!
REQUEST YOUR ATC PART'S @ The 3 & 4 Wheeler Emporium
Got The Holeshot
Arm chair racerJust too addicted
Broken valve spring?It will still work but not good.
80' Honda CR80R
78' Honda XR75
77' Honda CT-70
74' Honda CT-70
75' Yamaha GT80 Enduro
76' Kawasaki KZ900
73' Kawasaki H1-500
76' Kawasaki H1-500
They always run best before they blow!
Manuals: http://www.oscarmayer.net/atc/manuals/
Reply With Quote
