Results 1 to 4 of 4

Thread: 250sx popping out of gear

  1. #1
    pudge is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jan 2009
    Location
    CT
    --
    159

    250sx popping out of gear

    i am going to look at ax SX that looks decent and is only 350 bucks. he says that it occasionally pops out of gear when riding. i assume its the auto clutch needing some help or replacement which wont cost more that about 100bucks. what else can cause this? i dont want to get into a full bottom end swap if its a ton of work. i see plenty of bottom ends on ebay but not sure how involved changing it over is. clutch seems easier for sure

  2. #2
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,804
    When you test drive it if it just falls out of gear when under a load its a bent or worn shifer fork in the tranny and all gears related to that fork will need replacing . Second gear is the most common gear and fork to go bad .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  3. #3
    Join Date
    Mar 2008
    Location
    EastGreenbush, newyork
    --
    3,494
    i new some body on here snagged that. I was 2 hrs away, and ready to hop in the truck when he said it was already gone. didnt last 1/2 a day!! have fun with it.

  4. #4
    Join Date
    Feb 2009
    Location
    michigan
    --
    2,387
    shift fork is my guess,gears will have to be determined when you open her up
    1985 ATC 250R
    . Team Red Trike

//ArrowChat Integreation Code //