hello i have an 84 200es big red with a bad ignition switch. how do i go about hot wiring this.
hello i have an 84 200es big red with a bad ignition switch. how do i go about hot wiring this.
I believe you can just unplug it. Some one correct me if Im wrong.
1985 Auto X lots of upgrades
1982 Honda 185s 3inch wheel spacers, bassani exhaust
2001 400ex
1983 110
Lots O Trikes!!!!!
TRIKEFEST 03, 04, 05, 07, 09 Going the distance
on my 85 sx i cut the wires off the key and twisted the red and black together (Ignition was beat with a) that did the job till i can get a new one
Stuff I Have Or Had
85 ATC70 - stolen
85 ATC110 - Stolen
83 ATC110 - Gave It Away
86 ATC125m -Gone
83 ATC185S -Gone
?? ATC200 Big Red-Gone
83 ATC200 -Gone
85,85,83 ATC200X - Gone
84 ATC250R - Running but needs 2nd gear
83 ATC250R -Gone
84 ATC200M - Freebie
85 ATC250SX - The Barny Trike It Rides Now
85 ATC250SX - Gone
85 ATC350X - My ride for now
86 ATC350X - My son rides this one now
99 FXSTS - My Baby
08 SunL 150cc Dune Buggy - For The Little Guys
not missing the key. when i bought the bike u would sometimes have to wiggle the key to get the green nuetral light to turn on, now it wont turn on at all so im assuming the ignition went out.
disconecting the ignition will work...however you wont have the electric start or lights. i used to do this with my 250sx whenever my father would try and "ground" me from my trike
i have a toggle switch i can hook up to the ignition wires how do i do this. also my pull cord wont retract and i cant figure out how to fix it