Results 1 to 5 of 5

Thread: Quick question on electrics on 1980 atc110

  1. #1
    Join Date
    Dec 2009
    Location
    Massachusetts, USA
    --
    12

    Quick question on electrics on 1980 atc110

    So i've got no spark on my atc 110. its a 1980. i've determined its the spark plug wire and coil that are bad. on my 1980 there is a little capacitor looking thing with a single wire going into it and then the coil is next to it. I'm looking to get a replacement but i can only find one for a 1981+ which doesnt have the little capacitor attached, just a coil and wire. what is that little resistor/capacitor thing on there? and where can i get one?

  2. #2
    Join Date
    Sep 2009
    Location
    Ireland
    --
    89
    That's the condensor, the 81 engine is CDI so the setup is slightly different. There's usually a few 79/80 coils on ebay.

  3. #3
    Join Date
    Dec 2009
    Location
    Massachusetts, USA
    --
    12
    But there selling just the coil, i need the condensor bc thats the part that the wire was pulled out of.

  4. #4
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,798
    1980 coil set up has the condensor as part of the coil all in one and is 6 volt . 81 and newer 110's are a CDI set up and is also 12 volts so it wont work .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  5. #5
    Join Date
    Dec 2009
    Location
    Massachusetts, USA
    --
    12
    thanks shortline. now i know what to look for

//ArrowChat Integreation Code //