has anyone done a front sprocket on a atc110

[Mr_RPM]

i have the new sprockets and chain on the way so i started taking it apart and found the front sprocket berried up in the engine (like its suppose to be) and it looks like im gonna have to take off the side cover, and ill prolly need to get a gasket now
but i haven't taken the engine cover or pull starter off yet. has anyone else done this? wanna give me the quick threw on how to do it all, i dont see anything on my manual, im not to worried just figured i would ask here before i start ripping it apart.

and maybe a quicky on taking the back sprocket off too, just to make sure i dont do to many steps and take off crap i dont need to, lol im good at doing that, over complicating things lol

[Mr_RPM]

and i mean the engine side cover, not the chain side cover, i already have that off, and the hub/wheel off

[shortline10]

That's a big question your asking . You really need a good manual . basically you need to remove the left side cover and fly wheel , Hi/low case & gears and your their . New gaskets and seals if you have the doe .

[rdlsz24]

I changed one on a 125m a couple years back. It wasn't bad if you follow the manual like shortline suggested.

Rob

[Mr_RPM]

yeah, I got 2 manuals and my dad is the mechanic at the local dealer so ill have him help me out, haha. its just the kinda project you learn as you go, but thankyou shortline now i know i need a flywheel puller. ugh so complex for something so simple on any newer quad. but no big deal i have all the tools and thanks to my father all the know how.