What type of oil do I put in the lower unit of my 86 tecate? Regular 4 stroke motor oil?
What type of oil do I put in the lower unit of my 86 tecate? Regular 4 stroke motor oil?
84 Big Red- User
85 250SX- clean
85 200X- mint- < 10 hrs on it
85 350X- Mint- <40 hours on it
86 350X- mint- <40 hours on it
2-85 tri-z's- Both frame off restorations
84 250R- Mint- <15 hours on it
86 250R- Super clean- < 30 hours on it
86 500R- Sick fast!!!
86 Tecate 3- Frame off restoration- Mint
86 Big Red- Mint- <30 hours on it
I run 10W-30 in my 2 strokes, but I live in colorado, in the summer I run Chevron HDAX low ash 15W40 due to the heat. It depends on where ya live. For LA, 10W40 or possibly 20W50. IMO
You will cry, you will scream if you've heard half the **** I've seen.
Are you gonna get up and burn an X in your head?
"Cut throught the bone and cut through the wire"
Trikes:
84&85 Tecates
85 R
85 X
Support Scrapthraher Customs!!! Home of the Three Wheel Outlaws! PM me if you need a head rebuilt, valves cut, head milled or lapped!!!!!
I have this stuff in mine, so does a friend of mine. We have never had any issues and I am mean to my stuff.
http://www.rockymountainatvmc.com/pr...FamilyId=11719
85 350x 12:1 piston and porting by "boosted96cobra"
4 85 tecates 1 runs
5 84 tecates none run
1 84 Yamaha Zinger, mildly ported & polished, milled, bored .25 over finally running
2 atc 90's just parts bikes
00 rm250
93 kx500
2 Honda 200m parts bikes
Yamaha brand (Trans Oil Plus) in my Tecate! I change it often....or should I say after riding it hard, comes out as new as I put it in! Can't go wrong!
1985 KXT250 A.K.A. "Doom"/Multiple Engine Combinations/Jason Hall Inverts/HRE Swing Arm, Cal Fab Swing Arm/Jemco Pipe/Buzz Saw Cylinder, Klemm Research Cyinder/PWK Carb/PVL Ignition/Dura Blue Axle/Mosh Custom Seat
in my 250r i use lightweight gear oil for the gearbox. had no trouble.
my rides: 86 250r, 84 200es & 82 185s