Results 1 to 3 of 3

Thread: 200x spark/starting issue?; 200x trailer hitch?

  1. #1
    Join Date
    Jan 2010
    Location
    Worcester, MA
    --
    1,117

    200x spark/starting issue?; 200x trailer hitch?

    I have two issues:

    1. Has anyone put a trailer hitch on the 83-85 200x? If so, how was it done/pictures?

    2. I can't get this X engine to start. Getting gas, even tried spraying carb spray directly into cylinder to start. (It did start, once.) However, it doesn't always spark. When it does, it sometimes seems real weak.

    I tried another used plug I had, and took the plug wire + coil off my perfectly running 200s. If I try to kick start it, it sparks most of the time, with a weaker-than-standard spark. I must let the kickstarter go all the way back up in-between kicks or it won't spark.

    What do you think the issue could be? Compression seems good, and it did actually start once. I know both plugs were used, but I've seen original plugs in 25-35+ year old machines still working. And I doubt both were bad.

    Thanks

  2. #2
    Join Date
    Dec 2007
    Location
    Quebec,Canada
    --
    1,014
    check the gap between pickup coil and rotor,if the cam is worn the cap will be excessive.And check the stator.....many honda 200 have this problem and the exciter coil is bad.

    1986 ATC500X
    1985 ATC250SX
    1985 ATC200X
    1985 ATC250R
    1986 ATC250R
    1984 ATC250R
    1981 ATC70
    1984 ATC70
    1985 ATC70
    Custom built ATC70 / 250R laydwon swap
    1986 ATC250SX FATCAT

  3. #3
    Join Date
    Jan 2010
    Location
    Worcester, MA
    --
    1,117
    I have a spare stator/all other elec. parts from a running 185s. Anyone know if those will all work on this 200x?

//ArrowChat Integreation Code //